No photo of this unit online yet. Ask for photos

NVIDIA Mellanox

NVIDIA Mellanox MFA7U10-H003-FLT HDR 400G OSFP to 2x200G QSFP56 AOC 3m Flat

Part no.MFA7U10-H003-FLT

€600.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MFA7U10-H003-FLT: T.E.S IT-SOLUTIONS sells the MFA7U10-H003-FLT at €600, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Recovered from end-of-life equipment, inspected and tested before it ships.

See the production flow

Description

NVIDIA Mellanox® MFA7U10-H003-FLT — HDR 400Gb/s OSFP to 2x 200Gb/s QSFP56 AOC Splitter, 3m, Flat Top

Technical Identity

The NVIDIA Mellanox® MFA7U10-H003-FLT is an InfiniBand twin-port HDR active optical splitter cable (AOC): one OSFP 400Gb/s (2x HDR) head end fanning out to two QSFP56 200Gb/s HDR endpoints, 3 meters, with a flat-top OSFP connector. NVIDIA’s official ordering description: "NVIDIA AOC splitter, IB twin port HDR, 400Gb/s to 2x200Gb/s, OSFP to 2xQSFP56, 3m flat top." Per the NVIDIA product specification, the cable runs over multimode fiber at 850nm (VCSEL transmitters, PIN receivers), routing the 8 fiber pairs of the OSFP end into 4 pairs per QSFP56 end. Condition: Refurbished.

Specifications

Brand: NVIDIA Mellanox
Model / MPN: MFA7U10-H003-FLT
NVIDIA P/N: — (ordering P/N is the MPN itself per NVIDIA ordering table)
Product type: Active Optical Cable (AOC) splitter
Product family: NVIDIA LinkX MFA7U10-H00x
Connector: OSFP (flat top) to 2x QSFP56
Configuration: 1x OSFP 400Gb/s (2x HDR) to 2x QSFP56 200Gb/s HDR — 1-to-2 splitter
Speed: 400Gb/s aggregate; 200Gb/s HDR per split end
Protocol: InfiniBand twin-port HDR
Length: 3m; minimum bend radius 30mm
Medium: multimode fiber (MMF), 850nm VCSEL / PIN optics
Modulation: 53.125Gb/s-per-lane PAM4 (4 lanes per QSFP56 end)
Diagnostics: EEPROM on each end readable by the host system
OSFP top: flat top (FLT variant)
Condition: Refurbished

Manufacturer documentation: NVIDIA MFA7U10-H00x 400Gb/s OSFP to 2x200G QSFP56 AOC splitter product specifications. T.E.S IT-SOLUTIONS is independent of NVIDIA.

Lane & Signal Logic (HDR Breakout)

  • Head end (OSFP 400G): 8 optical lanes = 2x 4-lane HDR 200Gb/s port groups, 400Gb/s aggregate.

  • Split ends (2x QSFP56 200G): each carries 4 lanes at approximately 53Gb/s PAM4 = 200Gb/s HDR per port.

  • Direction of split: twin-port OSFP to dual QSFP56 (1-to-2 breakout). NOT a 1-to-4 splitter.

  • Optics: integrated 850nm VCSEL transmitters and PIN receivers on all ends — fixed-length optical assembly.

What This Is NOT

  • NOT a copper cable. This is an active optical cable (MMF, 850nm) — not a DAC and not an ACC.

  • NOT an NDR cable. This is HDR class (200Gb/s per split end); NDR 400Gb/s-per-port splitters are a different LinkX family.

  • NOT an OSFP-to-OSFP 1-to-1 cable. It is a 1-to-2 splitter ending in QSFP56.

  • NOT a QSFP28 / EDR cable. Split ends are QSFP56 (HDR / 4x PAM4 lanes), not QSFP28.

  • NOT the finned-top MFA7U10-H003. The -FLT suffix denotes a flat-top OSFP shell — verify which OSFP cage type your head-end system requires before ordering.

  • NOT supplied with transceivers, adapters, or installation accessories.

Compatibility & Hard Constraints

  • Typical head-end platforms: NVIDIA Quantum-2 class switches with OSFP cages configured for HDR breakout to legacy 200Gb/s equipment.

  • Typical split-end devices: QSFP56 HDR 200Gb/s ports — e.g., ConnectX-6 VPI adapters or Quantum QM8700-class HDR switch ports.

  • Software dependencies: switch firmware with the HDR breakout port profile enabled; cable recognized via EEPROM — verify in switch CLI / mlxlink; MLNX_OFED or DOCA stack on host endpoints.

  • Reach: 3m fixed optical assembly; minimum bend radius 30mm.

  • Power: drawn from host cages — no external supply required.

  • Pre-deployment verification: confirm OSFP top type (flat vs finned) for the head-end cage, switch firmware, and port-mode configuration.

Frequently Asked Questions (FAQ)

What is the NVIDIA Mellanox MFA7U10-H003-FLT?

MFA7U10-H003-FLT: An NVIDIA AOC splitter for InfiniBand twin-port HDR: one flat-top OSFP 400Gb/s head end to two QSFP56 200Gb/s HDR endpoints over 3m of multimode fiber with 850nm VCSEL optics.

What does the -FLT suffix mean?

MFA7U10-H003-FLT: Flat top: the OSFP connector uses a flat-top shell rather than the finned heat-sink top of the standard MFA7U10-H003. Choose the top type that matches your head-end OSFP cage and cooling design.

Is this an optical or copper cable?

MFA7U10-H003-FLT: Optical — an active optical cable running over multimode fiber at 850nm. It is not a DAC or ACC copper assembly.

Will the split ends fit QSFP28 or OSFP cages?

MFA7U10-H003-FLT: The two split ends are QSFP56 and plug into QSFP56 HDR cages. The head end is OSFP only. Neither end fits a QSFP28-only EDR cage at rated speed, and QSFP56 ends do not fit OSFP cages.

What hardware works with the MFA7U10-H003-FLT?

MFA7U10-H003-FLT: Typical head-end platforms include NVIDIA Quantum-2 class OSFP switch ports configured for HDR breakout; typical split-end devices include ConnectX-6 QSFP56 HDR adapters and QM8700-class HDR switch ports. Verify firmware and port profiles first.

What condition is supplied by T.E.S IT-SOLUTIONS?

MFA7U10-H003-FLT: Refurbished. Each unit receives link verification where test topology is available, EEPROM / vendor data check, and cosmetic inspection. global B2B shipping.

Why T.E.S IT-SOLUTIONS

Every MFA7U10-H003-FLT unit ships with: (1) link verification where test topology is available, (2) EEPROM / vendor data check, (3) full cosmetic inspection, (4) professional anti-static packaging, (5) global B2B shipping from Haifa, Israel, (6) technical consultation for HPC / AI fabric design at no extra cost. See tes-itsolutions.com.