NVIDIA Networking Product Lines Explained: ConnectX to LinkX

NVIDIA networking hardware comes in five families: ConnectX adapters, BlueField DPUs, Quantum InfiniBand switches, Spectrum Ethernet switches and LinkX cables and transceivers. Most parts still carry Mellanox-era part numbers, and the first three letters tell you the family. This map is for engineers and buyers who need to identify a part, match it to a fabric and order the right generation.
From Mellanox to NVIDIA
NVIDIA completed its acquisition of Mellanox Technologies on April 27, 2020, in a deal valued at $7 billion. The product lines kept their names. ConnectX, BlueField, Quantum, Spectrum and LinkX were all Mellanox families before 2020. That is why buyers still search for "Mellanox ConnectX-5" or "Mellanox MQM8700" when the part ships with an NVIDIA label.
One change matters when you order. Current NVIDIA manuals list a numeric SKU next to the old part number, which NVIDIA calls the "legacy OPN". The QM9700 managed switch, for example, is SKU 920-9B210-00FN-0M0 with legacy OPN MQM9700-NS2F. The ConnectX-7 card MCX75310AAS-HEAT is SKU 900-9X766-003N-ST02. Both numbers point to the same product, so quote either one.
The five families
- ConnectX: network adapter cards for servers. Ethernet-only models (the "EN", "Lx" and "Dx" lines) and VPI models that run InfiniBand or Ethernet. Browse them under adapter cards.
- BlueField: DPUs (data processing units). A BlueField card is a network adapter with its own on-board memory and storage. The BlueField-2 MBF2H536C-CECOT, for example, carries 32GB of DDR memory and on-board eMMC storage.
- Quantum: InfiniBand switch systems for HPC and AI clusters.
- Spectrum: Ethernet switch systems. Both switch families are listed under switches.
- LinkX: the cable and optics line: passive copper DACs, active optical cables (AOCs) and transceivers. See interconnect.
Generations and speeds
The table below lists the generations buyers ask us about most. Speeds come from NVIDIA user manuals and product specifications. Where a family has many models, the speed shown is for the example part.

| Family | Product type | Protocol | Speeds | Example part number |
|---|---|---|---|---|
| ConnectX-4 Lx | Adapter | Ethernet | 1/10/25GbE, PCIe Gen 3.0 x8 | MCX4111A-ACAT |
| ConnectX-5 VPI | Adapter | InfiniBand + Ethernet | EDR 100Gb/s, 100GbE, PCIe Gen 3.0 x16 | MCX556A-ECAT |
| ConnectX-6 VPI | Adapter | InfiniBand + Ethernet | HDR 200Gb/s, up to 200GbE, PCIe Gen 3/4 x16 | MCX653106A-HDAT |
| ConnectX-6 Dx | Adapter | Ethernet | Up to 100GbE, PCIe Gen 4.0 x16 | MCX623106TN-CDAT |
| ConnectX-7 | Adapter | InfiniBand + Ethernet | NDR200 200Gb/s and 200GbE, PCIe Gen 4.0/5.0 x16 | MCX75310AAS-HEAT |
| BlueField-2 | DPU | Ethernet (VPI models also InfiniBand) | 100GbE, PCIe Gen 4.0 x16 | MBF2H536C-CECOT |
| BlueField-3 | DPU / SuperNIC | InfiniBand + Ethernet | NDR200 200Gb/s and 200GbE, PCIe Gen 5.0 x16 | B3220 (900-9D3B6-00CV-AA0) |
| Quantum | Switch | InfiniBand | HDR 200Gb/s, 40 QSFP56 ports, 1U | MQM8700-HS2F |
| Quantum-2 | Switch | InfiniBand | NDR 400Gb/s, 64 ports over 32 OSFP, 1U | MQM9700-NS2F |
| Quantum-3 | Switch | InfiniBand | XDR 800Gb/s, 144 ports over 72 OSFP, 4U | Q3400-RA |
| Spectrum | Switch | Ethernet | 40/50/100GbE, 32 QSFP28 ports | SN2700 |
| Spectrum-2 | Switch | Ethernet | 200GbE, 32 QSFP56 ports, 1U | SN3700 |
| Spectrum-3 | Switch | Ethernet | 400GbE, 32 QSFP-DD ports, 1U | MSN4700-WS2FC |
| Spectrum-4 | Switch | Ethernet | 800GbE, 64 OSFP ports, 2U | SN5600 |
| LinkX DAC | Passive copper cable | Per part number | HDR 200Gb/s QSFP56, 0.5m to 2m | MCP1650-H001E30 |
| LinkX AOC | Active optical cable | Per part number | 100Gb/s QSFP28; 200Gb/s QSFP56 up to 100m | MFA1A00-C010, MFS1S00-HxxxV |
| LinkX transceiver | Optical module | InfiniBand + Ethernet | 800Gb/s twin-port OSFP, 2x 400Gb/s | MMA4Z00-NS, MMS4X00-NM |
For a deeper look at the two InfiniBand switches most AI clusters use today, read MQM8700-HS2F vs MQM9700: HDR vs NDR.
How to read the part number
The prefix tells you the family. This pattern holds across every NVIDIA ordering table we checked for this post:
- MCX: ConnectX adapter. MCX4111A-ACAT (ConnectX-4 Lx), MCX556A-ECAT (ConnectX-5), MCX75310AAS-HEAT (ConnectX-7).
- MBF: BlueField DPU. MBF2H536C-CECOT is a BlueField-2.
- MQM: Quantum InfiniBand switch. MQM8700-HS2F is the QM8700; MQM9700-NS2F is the QM9700.
- MSN: Spectrum Ethernet switch. MSN4700-WS2FC is the SN4700.
- MCP: copper cable. NVIDIA describes MCP1650-H001E30 as a "Passive Copper cable, IB HDR".
- MFA / MFS: active fiber (optical) cable. MFA1A00 is a 100Gb/s QSFP28 AOC; MFS1S00-HxxxV is a 200Gb/s QSFP56 AOC.
- MMA / MMS: transceiver. MMA4Z00-NS is multimode (50m); MMS4X00-NM is single mode (500m).
The digits after a switch prefix are the model: MQM9700 is the QM9700, MSN4700 is the SN4700. The suffix carries options. On the QM9700, NS2F means power-to-connector (forward) airflow and NS2R means connector-to-power (reverse) airflow. On LinkX AOCs the letter after the dash often marks the protocol: MFA1A00-C010 is 100GbE Ethernet, MFA1A00-E010 is EDR InfiniBand. One letter can change airflow, operating system or protocol, so check the full suffix before you order. For adapters, our guide on how to choose the right ConnectX adapter walks through the card options.
Common mistakes
- Wrong fabric. Quantum systems are InfiniBand switches. Spectrum systems are Ethernet switches. Choose the switch by fabric, not by the shape of the port cage.
- Assuming every ConnectX runs InfiniBand. ConnectX-4 Lx and ConnectX-6 Dx are documented as Ethernet adapter cards. Only VPI models list InfiniBand rates.
- Mismatched cages. The QM8700 uses QSFP56, the QM9700 uses OSFP and the SN4700 uses QSFP-DD. A cable or module must match the cage at each end.
- Wrong airflow suffix. An F (forward) unit in a rack built for R (reverse) airflow works against the cooling design.
- Ignoring the slot. ConnectX-4 Lx cards use PCIe Gen 3.0 x8. ConnectX-7 cards are x16 cards with Gen 4.0/5.0 SERDES. Check the server slot before you choose the card.
- Stretching copper. The MCP1650 HDR DAC family stops at 2m. For longer HDR runs, use an AOC such as MFS1S00-HxxxV (up to 100m) or transceivers.
Sources: NVIDIA press release on the Mellanox acquisition; ConnectX-4 Lx specifications; ConnectX-5 VPI manual; ConnectX-6 VPI manual; ConnectX-6 Dx manual; ConnectX-7 manual; BlueField-2 DPU guide; BlueField-3 guide; QM87xx switch manual; QM97xx switch manual; XDR switch manual; SN2000 switch manual; SN3000 ordering list; SN4000 ordering list; SN5000 switch manual; MCP1650-H DAC ordering list; MFS1S00-H AOC specifications; MFA1A00 AOC ordering list; MMA4Z00-NS transceiver specifications; NVIDIA interconnect product list.
Parts we stock
Parts in this post
NVIDIA Mellanox MCX75310AAS-HEAT ConnectX-7 200G OSFP PCIe 5.0 x16MCX75310AAS-HEATView part
NVIDIA Mellanox MCX623106TN-CDAT ConnectX-6 Dx 100GbE Dual QSFP56 PTP NICMCX623106TN-CDATView part
NVIDIA Mellanox MBF2H536C-CECOT BlueField-2 DPU 100GbE Dual QSFP56 32GBMBF2H536C-CECOTView part
NVIDIA Mellanox MQM8700-HS2F Quantum HDR 200Gb/s Switch 40-Port QSFP56 P2CMQM8700-HS2FView part
NVIDIA Mellanox MQM9700-NS2F Quantum-2 NDR 64-Port Managed IB SwitchMQM9700-NS2FView part
NVIDIA Mellanox MSN3700-VS2FC Spectrum-2 200GbE 32x QSFP56 Cumulus 1UMSN3700-VS2FCView part
NVIDIA Mellanox MSN4700-WS2FC Spectrum-3 400GbE 1U SwitchMSN4700-WS2FCView part
NVIDIA Mellanox MCP1650-H001E30 LinkX HDR 200G QSFP56 Passive DAC Cable 1mMCP1650-H001E30View part
NVIDIA Mellanox MFA1A00-C010 LinkX 100GbE QSFP28 10m AOC (LSZH) CableMFA1A00-C010View part
We rebuild and test every unit before it ships. See how we build. A few examples across the families:
- MCX75310AAS-HEAT ConnectX-7: single-port OSFP, NDR200 200Gb/s or 200GbE.
- MCX623106TN-CDAT ConnectX-6 Dx: dual-port QSFP56, up to 100GbE, PTP and SyncE support.
- MBF2H536C-CECOT BlueField-2 DPU: 2x QSFP56 100GbE, 32GB on-board DDR, PCIe Gen 4.0 x16.
- MQM8700-HS2F Quantum: 40 QSFP56 ports, HDR 200Gb/s, 1U.
- MQM9700-NS2F Quantum-2: 64 NDR ports over 32 OSFP cages, managed, P2C airflow.
- MSN3700-VS2FC Spectrum-2: 32 ports of 200GbE (QSFP56), 1U.
- MSN4700-WS2FC Spectrum-3: 32 QSFP-DD ports, 400GbE, Cumulus Linux, P2C airflow.
- MCP1650-H001E30 LinkX DAC: HDR 200Gb/s QSFP56 passive copper, 1m, 30AWG.
- MFA1A00-C010 LinkX AOC: 100GbE QSFP28 active optical cable, 10m, LSZH.
- MMA4Z00-NS LinkX transceiver: 800Gb/s twin-port OSFP, 2x 400Gb/s multimode, up to 50m.
FAQ
What does the MCX prefix mean in an NVIDIA part number?
MCX marks a ConnectX network adapter card. MCX4111A-ACAT is a ConnectX-4 Lx card with 1/10/25Gb/s Ethernet on one SFP28 port, and MCX75310AAS-HEAT is a ConnectX-7 card with one OSFP port at NDR200 200Gb/s or 200GbE.
What is the difference between the MQM8700-HS2F and the MQM9700-NS2F?
The MQM8700-HS2F is a Quantum HDR switch with 40 QSFP56 ports at 200Gb/s in 1U. The MQM9700-NS2F is a Quantum-2 NDR switch with 64 ports at 400Gb/s over 32 OSFP cages in 1U, managed, with P2C airflow.
Is ConnectX-6 Dx an InfiniBand adapter?
No. ConnectX-6 Dx is an Ethernet adapter line. The MCX623106TN-CDAT, for example, has two QSFP56 ports at up to 100GbE on PCIe Gen 4.0 x16. For InfiniBand, choose a ConnectX-6 VPI card such as MCX653106A-HDAT (HDR 200Gb/s).
When did NVIDIA acquire Mellanox?
NVIDIA completed its acquisition of Mellanox Technologies on April 27, 2020, in a transaction valued at $7 billion. ConnectX, BlueField, Quantum, Spectrum and LinkX continued as NVIDIA product lines under the same names.
Does the MMA4Z00-NS transceiver work in Ethernet switches?
Yes. The MMA4Z00-NS is an 800Gb/s twin-port OSFP multimode transceiver with two 400Gb/s links up to 50m. NVIDIA lists it for air-cooled Quantum-2 InfiniBand and Spectrum-4 Ethernet OSFP switches; the switch sets the protocol.
Not sure which family or generation fits your rack? Send us the part number or the requirement and we will match it.