How to Choose the Right NVIDIA Mellanox Adapter for Your Needs

Choose an NVIDIA Mellanox adapter in this order: fabric, port speed, the server's PCIe generation and lanes, port type, then software support. Use a VPI card if you need InfiniBand, and an EN card if you only run Ethernet. For new builds, the families with current NVIDIA ordering numbers are ConnectX-6 Lx (25GbE), ConnectX-6 Dx (100GbE) and ConnectX-7 (NDR200, NDR, 400GbE). Older families suit matching an installed base.
ConnectX-3 to ConnectX-7 at a glance
Figures come from NVIDIA's user manuals. "Top rate" is the fastest rate any card in the family lists.
| Family | Example card | Top rate | Port types | PCIe | Protocols |
|---|---|---|---|---|---|
| ConnectX-3 | MCX354A-FCBT | FDR 56 Gb/s, 40/56GbE | QSFP+, SFP+ | 3.0 x8 | VPI or EN |
| ConnectX-4 Lx | MCX4121A-ACAT | 50GbE | SFP28, QSFP28 | 3.0 x8 | EN |
| ConnectX-4 | MCX456A-ECAT | EDR 100 Gb/s, 100GbE | QSFP28 | 3.0 x8 or x16 | VPI or EN |
| ConnectX-5 | MCX556A-ECAT | EDR 100 Gb/s, 100GbE | SFP28, QSFP28 | 3.0 x8 or x16 | VPI or EN |
| ConnectX-5 Ex | MCX556A-EDAT | EDR 100 Gb/s, 100GbE | SFP28, QSFP28 | 4.0 x8 or x16 | VPI or EN |
| ConnectX-6 Lx | MCX631102AN-ADAT | 50GbE | SFP28, QSFP28 | 4.0 x8 | EN |
| ConnectX-6 Dx | MCX623106AN-CDAT | 200GbE on 1 port, 100GbE on 2 | SFP28, SFP56, QSFP56 | 4.0 x8 or x16 | EN |
| ConnectX-6 | MCX653105A-HDAT | HDR 200 Gb/s, 200GbE | QSFP56 | 3.0/4.0 x8 or x16 | VPI or EN |
| ConnectX-7 | MCX75310AAS-HEAT | NDR 400 Gb/s, 400GbE | OSFP, QSFP112, SFP56 | 4.0/5.0 x16 | VPI or EN |
VPI vs EN
VPI (Virtual Protocol Interconnect) cards run InfiniBand or Ethernet on the same hardware. HPE's QuickSpecs add that its dual-port ConnectX-6 cards can work as dual-port InfiniBand, dual-port Ethernet or mixed-function cards. Buy VPI if you run InfiniBand, or if the card may move between fabrics.
EN cards run Ethernet only. ConnectX-4 Lx, ConnectX-6 Lx and ConnectX-6 Dx are EN families, so do not plan a Dx card into an InfiniBand fabric. NVIDIA also lists a few InfiniBand-only cards, such as the ConnectX-6 DE MCX683105AN-HDAT.
Two details catch buyers:
- A VPI part number still has a top rate. MCX653105A-ECAT tops out at HDR100 and 100GbE, and MCX653105A-HDAT reaches HDR and 200GbE.
- NVIDIA notes that MCX75310AAS-HEAT supports both InfiniBand and Ethernet from hardware version AA and higher. Check the revision on a ConnectX-7 card.
How to choose
- Fabric. Read the switch or the fabric plan. InfiniBand needs a card whose top rate matches the switch for full rate. Ethernet can use a VPI or an EN card.
- Speed. Match the port rate to the switch port. SFP28 links run at up to 25GbE. QSFP28 links run EDR or 100GbE.
- PCIe generation and lanes. NVIDIA states that PCIe 3.0 x16 supplies a maximum of 128Gb/s, so it cannot support 200Gb/s when both ports of an MCX556A-ECAT run at 100Gb/s. For 200Gb/s on PCIe 3.0, ConnectX-6 has Socket Direct cards that use 2 x16 slots. A 400Gb/s ConnectX-7 card meets the same limit on PCIe 4.0 x16, where the sum gives 256Gb/s before overhead.
- Port count. Two ports add redundancy, and the PCIe bus still caps the total.
- Form factor and bracket. Check for a stand-up PCIe slot or an OCP 3.0 slot, and tall or short bracket. Lenovo and HPE kits can include both brackets.
- Security. On ConnectX-6 Dx, IPsec and TLS need a crypto part number such as MCX623106AC-CDAT. MCX623106AN-CDAT has crypto disabled.
- Software support. See the status section below.
Decision table
| Your need | Family | Example | Note |
|---|---|---|---|
| 10/25GbE on an older PCIe 3.0 server | ConnectX-4 Lx | MCX4121A-ACAT | Matches an installed base |
| New 25GbE server | ConnectX-6 Lx | MCX631102AN-ADAT | PCIe 4.0 x8 |
| New 100GbE server | ConnectX-6 Dx | MCX623106AN-CDAT | PCIe 4.0 x16, Ethernet only |
| 100GbE with IPsec or TLS in the NIC | ConnectX-6 Dx crypto | MCX623106AC-CDAT | Read NVIDIA's IPsec bandwidth note |
| EDR InfiniBand fabric | ConnectX-5 VPI | MCX556A-ECAT | Or MCX556A-EDAT on PCIe 4.0 |
| HDR100 InfiniBand | ConnectX-6 VPI | MCX653106A-ECAT | QSFP56 |
| HDR or 200GbE | ConnectX-6 VPI | MCX653105A-HDAT | PCIe 3.0/4.0 x16 |
| NDR200 or 200GbE on PCIe 5.0 | ConnectX-7 | MCX75310AAS-HEAT | Single OSFP |
| FDR spares | ConnectX-3 | MCX354A-FCBT | Older driver branch, see below |
For deeper comparisons, read ConnectX-4 vs ConnectX-5 vs ConnectX-6 and ConnectX-6 vs ConnectX-7.
Port types
- QSFP+: ConnectX-3 FDR and 40GbE cards.
- SFP28: one lane per port, up to 25GbE.
- QSFP28: four lanes, EDR or 100GbE.
- QSFP56: ConnectX-6 HDR, HDR100, 100GbE and 200GbE cards.
- OSFP and QSFP112: ConnectX-7 NDR and NDR200 cards. Check the exact part number, because some ConnectX-7 cards use one and some use the other.
Our connector guide explains the differences, and cables are in the interconnect range.

Software support by family
- ConnectX-3 and ConnectX-3 Pro: MLNX_OFED dropped them at version 5.1, and NVIDIA points users to the 4.9 LTS version.
- ConnectX-4: DOCA 2.9.0 is the last DOCA release.
- ConnectX-4 Lx and ConnectX-5: NVIDIA says DOCA 3.6.0 is the final DOCA release, and DOCA 4.0 will not support them.
- ConnectX-6: NVIDIA's manual lists these part numbers as End of Life, and DOCA 3.5.0 still bundles firmware for them.
- ConnectX-6 Lx, ConnectX-6 Dx, ConnectX-7: listed in DOCA 3.5.0, with current ordering numbers in the user manuals.
What it does NOT work with
- InfiniBand on EN cards. ConnectX-4 Lx, ConnectX-6 Lx and ConnectX-6 Dx run Ethernet only.
- Current DOCA on ConnectX-3. Use MLNX_OFED 4.9 LTS.
- HDR on ConnectX-5. NVIDIA lists EDR as its top InfiniBand rate.
- A slot that is too narrow. A x16 card in a slower or narrower link is limited by that link. Check the server's slot map.
- Any switch without checking. Compatibility depends on switch vendor policy, firmware and port mode. Confirm these for your own system.
HPE, Dell and Lenovo versions we sell
HPE, Dell and Lenovo sell ConnectX cards under their own part numbers. These cards can differ from the retail versions. HPE says its Gen10 versions differ mainly in management features in the firmware. Dell's manual shows a Dell firmware ID on its cards. Confirm any OEM card for your server with the server maker. These examples are from our catalog, and our cross-reference shows how each pair was verified.
| Maker | Part number | Based on | Family |
|---|---|---|---|
| HPE | P06154-B21 | MCX653105A-HDAT | ConnectX-6, for Gen10 |
| HPE | P23664-B21 | MCX653105A-HDAT | ConnectX-6, for Gen10 Plus and Gen11 |
| HPE | P23666-B21 | MCX653106A-ECAT | ConnectX-6 HDR100 |
| HPE | R8M41-63001 | MCX623106AC-CDAT | ConnectX-6 Dx crypto |
| Dell | 0NNJ2M | MCX456A-ECAT | ConnectX-4 VPI |
| Dell | 0CY7GD | Not printed by Dell | ConnectX-6 VPI HDR |
| Lenovo | 01KT927 | MCX556A-ECAT | ConnectX-5 VPI |
| Lenovo | 02YG185 | MCX631432AS-ADAB | ConnectX-6 Lx, OCP |
Parts we stock
Parts in this post
NVIDIA Mellanox MCX354A-FCBT ConnectX-3 VPI FDR IB 40/56GbE Dual-Port QSFP x8MCX354A-FCBTView part
NVIDIA Mellanox MCX4121A-ACAT NIC ConnectX-4 Lx 25GbE Dual SFP28 PCIe3.0 x8MCX4121A-ACATView part
NVIDIA Mellanox MCX456A-ECAT ConnectX-4 VPI Dual-Port QSFP28 100Gb/s PCIe3 x16MCX456A-ECATView part
NVIDIA Mellanox MCX556A-ECAT ConnectX-5 VPI 100GbE/EDR Dual QSFP28 NICMCX556A-ECATView part
NVIDIA Mellanox MCX556A-EDAT NIC ConnectX-5 Ex VPI Dual-Port QSFP28 100Gb/sMCX556A-EDATView part
NVIDIA Mellanox MCX631102AN-ADAT ConnectX-6 Lx EN 25GbE Dual-Port SFP28MCX631102AN-ADATView part
NVIDIA Mellanox MCX623106AN-CDAT ConnectX-6 Dx Dual 100GbE QSFP56 No CryptoMCX623106AN-CDATView part
NVIDIA Mellanox MCX653105A-HDAT ConnectX-6 VPI HDR 200Gb/s 200GbE QSFP56 PCIeMCX653105A-HDATView part
NVIDIA Mellanox MCX75310AAS-HEAT ConnectX-7 200G OSFP PCIe 5.0 x16MCX75310AAS-HEATView part
T.E.S IT-SOLUTIONS is an independent manufacturer by requirement, based in Haifa. Adapter cards are repaired, rebuilt and tested: we inspect the card, ports and bracket, check the part number and device identity against the label, identify the firmware version, and run PCIe detection, with a link test where a test setup for the card is available. Cards carry a 30-day warranty. See all adapter cards, or send a part number to our contact page for volume or unlisted parts.
- MCX4121A-ACAT: ConnectX-4 Lx, 2 SFP28.
- MCX631102AN-ADAT: ConnectX-6 Lx, 2 SFP28.
- MCX623106AN-CDAT: ConnectX-6 Dx, 2 QSFP56.
- MCX556A-ECAT: ConnectX-5 VPI, 2 QSFP28.
- MCX653105A-HDAT: ConnectX-6 VPI, HDR.
- MCX75310AAS-HEAT: ConnectX-7, NDR200.
FAQ
What is the difference between VPI and EN adapters?
A VPI card runs InfiniBand or Ethernet. An EN card runs Ethernet only. ConnectX-4 Lx, ConnectX-6 Lx and ConnectX-6 Dx are EN families. For InfiniBand, buy a VPI part number whose top rate matches your fabric, such as MCX556A-ECAT for EDR or MCX653105A-HDAT for HDR.
Is ConnectX-6 Dx a VPI adapter?
No. NVIDIA describes ConnectX-6 Dx cards as EN Ethernet adapter cards, with up to two 100Gb/s ports or one 200Gb/s port. For InfiniBand on ConnectX-6, use a ConnectX-6 VPI card.
Which PCIe slot does a 100GbE adapter need?
Most 100GbE cards here use x16. MCX556A-ECAT is PCIe 3.0 x16, and NVIDIA states that bus supplies 128Gb/s at most, so two ports cannot both run at 100Gb/s. For that, use a PCIe 4.0 x16 card such as MCX623106AN-CDAT in a PCIe 4.0 x16 slot.
Should I buy an OEM version or a retail version?
Buy what your server maker supports. HPE, for example, lists separate part numbers per server generation for the same base card. Check the server's documentation, then send us the part number and we will match it to our catalog.