NVIDIA Mellanox

NVIDIA Mellanox MSX6036F-1BFR SwitchX-2 FDR 56Gb/s 36-Port QSFP IB Switch

Part no.MSX6036F-1BFR

€250.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MSX6036F-1BFR: T.E.S IT-SOLUTIONS sells the MSX6036F-1BFR at €250, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Built to your work order from a recovered chassis, with refurbished power supplies and fans for the airflow you need, then loaded with compatible firmware and operating system and tested before it ships.

See the production flow
MSX6036F-1BFRTap the photo for full size
NVIDIA Mellanox MSX6036F-1BFR SwitchX-2 FDR 56Gb/s 36-Port QSFP IB Switch, photo 1 of 9

Description

NVIDIA Mellanox MSX6036F-1BFR 36-Port FDR InfiniBand Switch (SwitchX-2, 56Gb/s): This is a managed 1U InfiniBand top-of-rack switch built around the Mellanox SwitchX-2 ASIC, providing 36 QSFP+ ports of non-blocking FDR (56Gb/s) connectivity. The "1BFR" SKU variant ships with a single power supply, short-depth chassis, and reverse airflow (PSU side to connector side, P2C). It is a fully managed switch running MLNX-OS — not an unmanaged or externally-managed (-1ER) variant. This is a refurbished unit, checked (see Inspection and checks).

Engineering Context

The SX6036 is the 36-port FDR member of the SX6000 family and was the workhorse FDR aggregation switch for HPC and storage deployments throughout the FDR generation. SwitchX-2 silicon delivers 4.032 Tb/s aggregate switching capacity and per-port latency in the 200 ns range. The 1BFR variant is short-depth (less than half the depth of a typical leaf switch), which makes it suitable for shallow telco and edge cabinets. As a managed unit it boots MLNX-OS with a captive subnet manager (OpenSM-based UFM-compatible) and exposes CLI, Web UI, and SNMP. The legacy unit shipped here is documented at MLNX-OS release 3.6.8008.

Deployment & Use Cases

Top-of-Rack FDR aggregation for HPC compute clusters running MPI workloads. Storage fabric switching for FDR-attached storage arrays (Lustre, GPFS/Spectrum Scale, BeeGFS). Lab and qualification benches where a managed FDR switch is needed at low cost. Educational and research clusters where FDR is the deployed interconnect generation. Backbone for ConnectX-3 and ConnectX-3 Pro VPI adapters.

Technical Specifications

OEM: NVIDIA Mellanox
Part Number: MSX6036F-1BFR
Switch ASIC: Mellanox SwitchX-2
Switch Family: SX6000
Port Count: 36 x QSFP+
Per-Port Speed: 56Gb/s FDR InfiniBand
Aggregate Switching Capacity: 4.032 Tb/s non-blocking
Form Factor: 1U rack-mount, short depth
Management: Fully managed — MLNX-OS (CLI / Web / SNMP)
Power Supplies: 1 (single PSU variant)
Airflow: P2C — PSU side to Connector side (reverse)
Condition: Refurbished — Checked by T.E.S IT-SOLUTIONS (see Inspection and checks)

Manufacturer documentation: Mellanox SwitchX and SwitchX-2 1U switch hardware user manual (PDF). T.E.S IT-SOLUTIONS is independent of NVIDIA.

Compatibility & Hard Constraints

Compatible with Mellanox FDR-class adapters: ConnectX-3 and ConnectX-3 Pro VPI HCAs operating at FDR (56Gb/s) or below (FDR10, QDR, DDR, SDR auto-negotiation). Compatible with QSFP+ FDR optics and copper DACs (MC2207xxx series). The "1BFR" reverse airflow variant must be matched to a hot-aisle/cold-aisle layout with cold air entering the connector face and exhausting from the PSU face — do not mix airflow directions in the same rack row. This is the FDR generation switch — it is not EDR (100G) and not HDR (200G); EDR/HDR transceivers and cables will not link up. The unit ships with one power supply only — there is no redundant PSU in this SKU. External subnet manager (e.g., UFM) may be substituted for the on-board manager.

Why Choose T.E.S IT-SOLUTIONS

T.E.S IT-SOLUTIONS checks each unit before shipment (see Inspection and checks). We provide expert consultation on InfiniBand fabric architecture, MLNX-OS configuration, global shipping from Israel, and 1–3 day handling time. Visit https://www.tes-itsolutions.com for the full networking catalog.

Frequently Asked Questions

What per-port speed does the MSX6036F-1BFR have?

The MSX6036F-1BFR per-port speed is 56Gb/s FDR InfiniBand.

What is the MSX6036F-1BFR NOT compatible with?

It is a fully managed switch running MLNX-OS — not an unmanaged or externally-managed (-1ER) variant. Confirm fitment against your platform before ordering MSX6036F-1BFR.

What condition is the MSX6036F-1BFR supplied in, and who sells it?

The MSX6036F-1BFR is supplied in Refurbished condition by T.E.S IT-SOLUTIONS from Haifa, Israel, with 1-3 business day handling and worldwide B2B shipping.