NVIDIA Mellanox

NVIDIA Mellanox MCP7H70-V02A 200GbE QSFP56 to 4x50GbE SFP56 DAC Splitter 2.5m

Part no.MCP7H70-V02A

€99.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MCP7H70-V02A: T.E.S IT-SOLUTIONS sells the MCP7H70-V02A at €99, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Recovered from end-of-life equipment, inspected and tested before it ships.

See the production flow
MCP7H70-V02ATap the photo for full size
NVIDIA Mellanox MCP7H70-V02A 200GbE QSFP56 to 4x50GbE SFP56 DAC Splitter 2.5m, photo 1 of 3

Description

NVIDIA Mellanox® MCP7H70-V02A — 200GbE QSFP56 to 4x50GbE SFP56 Passive DAC Splitter, 2.5m

Technical Identity

The NVIDIA Mellanox® MCP7H70-V02A (full NVIDIA ordering P/N MCP7H70-V02AR26) is a 2.5-meter passive copper hybrid splitter cable: one 200GbE QSFP56 head end fanning out to 4 x 50GbE SFP56 endpoints. The head end runs 4 lanes × 50G-PAM4 = 200Gb/s; each SFP56 endpoint carries one 50G-PAM4 lane. NVIDIA ordering description: passive copper hybrid cable, 200GbE 200Gb/s to 4x50Gb/s, QSFP56 to 4xSFP56, colored pulltabs, 2.5m, 26AWG. Protocol: Ethernet only. Condition: Refurbished Grade A.

Specifications

Brand: NVIDIA Mellanox
Model / MPN: MCP7H70-V02A
NVIDIA ordering P/N: MCP7H70-V02AR26
Product type: Passive copper DAC splitter (hybrid breakout)
Product family: NVIDIA LinkX MCP7H70-V0xxRyy
Connector: QSFP56 to 4x SFP56
Configuration: 1-to-4 breakout — 1x 200GbE QSFP56 to 4x 50GbE SFP56
Speed: 200Gb/s aggregate; 50Gb/s per SFP56 endpoint
Modulation: 50G-PAM4 per lane
Length: 2.5m
Wire gauge: 26 AWG
Pull-tabs: colored, per NVIDIA ordering description
Protocol: Ethernet 200GbE (Ethernet-only family)
Medium: Passive copper — no active electronics
Operating temperature: 0°C to 70°C (commercial)
Condition: Refurbished Grade A

Lane & Signal Logic (1-to-4 Breakout)

  • Head end (200GbE QSFP56): 4 electrical lanes × 50Gb/s PAM4 = 200Gb/s aggregate.

  • Split ends (4x SFP56): each SFP56 carries 1 lane × 50Gb/s PAM4 = 50GbE per endpoint.

  • Direction of split: 4-lane → 4 x 1-lane (1-to-4 breakout). NOT a 1-to-2 splitter.

  • Passive: no signal-conditioning electronics in any connector.

What This Is NOT

  • NOT a 1-to-1 cable. This is a 1-to-4 breakout; the switch port must be configured for 4x50G breakout operation.

  • NOT a QSFP28 to 4xSFP28 25G-NRZ breakout. This assembly is 50G-PAM4 per lane; endpoints must support SFP56 50GbE PAM4 operation.

  • NOT an OSFP or QSFP-DD cable. QSFP56 head end and SFP56 endpoints only.

  • NOT an active copper cable or AOC. Fully passive copper — no electronics, no optics.

  • NOT InfiniBand. NVIDIA classifies the MCP7H70 family as 200GbE Ethernet; it is not an HDR InfiniBand splitter.

  • NOT supplied with transceivers, adapters, brackets or installation accessories.

Compatibility & Hard Constraints

  • Typical head-end platforms: NVIDIA Spectrum-family 200GbE QSFP56 switch ports (e.g., Spectrum-2 / Spectrum-3 class) configured for 4x50GbE breakout.

  • Typical endpoints: SFP56 50GbE ports — for example NVIDIA ConnectX-6 Lx class adapters at 50GbE. Endpoints must support 50G-PAM4.

  • Software dependencies: switch firmware with the 4x50G breakout port profile enabled; cable recognized via EEPROM — verify in switch CLI / mlxlink output; MLNX_OFED or in-box drivers on host endpoints.

  • Reach: 2.5m fixed, 26 AWG copper.

  • Power: drawn from host cages — near zero; no external supply required.

  • Pre-deployment verification: confirm switch firmware, breakout port profile, adapter firmware and driver versions.

Frequently Asked Questions (FAQ)

What is the NVIDIA Mellanox MCP7H70-V02A?

A 2.5m passive copper splitter: one 200GbE QSFP56 port to four 50GbE SFP56 endpoints, 50G-PAM4 per lane, 26 AWG. Full NVIDIA ordering P/N: MCP7H70-V02AR26.

What is the exact port math?

MCP7H70-V02A: 1x QSFP56 (4 lanes × 50G-PAM4 = 200Gb/s) fans out to 4x SFP56 (1 lane × 50G-PAM4 = 50Gb/s each). It is a 1-to-4 breakout, not 1-to-2.

Will it work with QSFP28 / SFP28 25G-NRZ ports?

MCP7H70-V02A: The assembly is built for 50G-PAM4 signaling. The head end must be a QSFP56 port configured for 4x50G breakout and each endpoint must support SFP56 50GbE PAM4; do not plan it as a 100G-to-4x25G NRZ splitter.

Is it active or passive, copper or optical?

MCP7H70-V02A: Passive copper. No active electronics, no optics — near-zero power and lowest latency for intra-rack breakout links.

What switches and adapters work with MCP7H70-V02A?

MCP7H70-V02A: Typical head-end platforms include NVIDIA Spectrum-2 / Spectrum-3 class 200GbE QSFP56 switch ports configured for 4x50GbE breakout; typical endpoints include ConnectX-6 Lx class SFP56 50GbE adapters. Verify firmware and port profiles before deployment.

Can it run InfiniBand HDR?

MCP7H70-V02A: No. NVIDIA classifies the MCP7H70 family as 200GbE Ethernet; it is not an InfiniBand HDR splitter.

What condition is supplied by T.E.S IT-SOLUTIONS?

MCP7H70-V02A: Refurbished Grade A — bench-tested where test topology is available, EEPROM check, cosmetic inspection. global B2B shipping.

Why T.E.S IT-SOLUTIONS

Every MCP7H70-V02A unit ships with: (1) link verification where test topology is available, (2) EEPROM / vendor data check, (3) full cosmetic inspection, (4) professional anti-static packaging, (5) global B2B shipping from Haifa, Israel, (6) technical consultation for HPC and AI fabric design at no extra cost. See tes-itsolutions.com.