NVIDIA Mellanox MC3309130-002 10GbE SFP+ Passive Copper Direct Attach Cable, 2m — Lot of 10: This listing is for ten (10) units of the MC3309130-002, a passive copper direct attach cable (DAC) terminated SFP+ to SFP+ for 10 Gigabit Ethernet point-to-point links. Each cable is a fixed-length integrated assembly with permanently terminated connectors; it is not a transceiver pair with separate twinax. All units are Refurbished, tested by T.E.S IT-SOLUTIONS.
Engineering Context
The MC3309130-002 operates passively with no active electronics in the connectors, drawing zero power from the host port and adding no transceiver-induced latency. It carries SFI signaling at 10.3125 Gb/s NRZ end-to-end. At 2 meters it spans typical intra-rack and inter-rack ToR-to-server distances while staying inside the SFP+ passive copper insertion-loss budget.
Deployment & Use Cases
ToR-to-server 10GbE links between an SFP+ access switch and a server in the same or adjacent rack. Mellanox SX1012 / SN2010 access tiers connecting to ConnectX-3 / ConnectX-4 Lx 10GbE host adapters. Storage controller to host bus adapter linkage across short distances. Stacking and inter-switch links between two switches in adjacent racks. Lab and integration test fixtures requiring transceiver-free 10GbE.
Technical Specifications
OEM: Mellanox (NVIDIA Mellanox)
Part Number: MC3309130-002
Form Factor: SFP+ to SFP+
Cable Type: Passive Copper Direct Attach (DAC)
Data Rate: 10GbE (10.3125 Gb/s NRZ)
Length: 2m
Power Draw: Passive (zero)
Protocol: 10 Gigabit Ethernet (SFI)
Quantity in Listing: 10 cables
Condition: Refurbished — Tested by T.E.S IT-SOLUTIONS
Compatibility & Hard Constraints
Compatible with NVIDIA Mellanox SX1012 / SN2010 / SX10xx-series SFP+ ports and ConnectX-3 / ConnectX-3 Pro / ConnectX-4 Lx adapters in 10GbE mode. Most third-party SFP+ switch ports that accept passive DACs (Arista 7050S, Cisco Nexus, Dell PowerSwitch) link up, subject to vendor SFP+ DAC allowlists in the switch OS. Not compatible with 25GbE SFP28 ports as a 25G link — this is a 10G-only DAC. Not compatible with 1GbE SFP-only ports unless explicit 10G/1G dual-rate support is present. Fixed 2m length.
Why Choose T.E.S IT-SOLUTIONS
T.E.S IT-SOLUTIONS verifies every refurbished DAC for connector contact, lane continuity, and label legibility before shipment. We provide expert guidance on SFP+ vendor-code interoperability, global shipping, and a 1–3 day handling time. View this product on tes-itsolutions.com.