Lenovo

LENOVO 03GX910 Mellanox OSFP→4×QSFP112 NDR200 800G Hybrid DAC Cable 1.5m

Part no.03GX910

€870.00

In stockCondition: New

Request a quote

Checkout runs on the secure Wix checkout page.

Also available: Refurbished, €640.00, in stock

Where to buy the 03GX910: T.E.S IT-SOLUTIONS sells the 03GX910 at €870, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Received, catalogued and inspected, and checked before it ships.

See the production flow
03GX910Tap the photo for full size
LENOVO 03GX910 Mellanox OSFP→4×QSFP112 NDR200 800G Hybrid DAC Cable 1.5m, photo 1 of 1

Description

LENOVO 03GX910 — 1.5m OSFP → 4× QSFP112 NDR200 Hybrid Breakout DAC (800G 1:4 splitter)

Technical Identity

The LENOVO 03GX910 is a Lenovo-branded passive copper hybrid breakout DAC, manufactured by NVIDIA Mellanox under the LinkX cable family. It splits one 800 Gb/s OSFP port on the switch end into four 200 Gb/s NDR200 QSFP112 ports on the adapter end over a 1.5 m run of copper. The Lenovo P/N 03GX910 is the OEM equivalent of NVIDIA part number MCP7Y40-N01A and is qualified by Lenovo for ThinkSystem AI/HPC GPU-server interconnect on NVIDIA Quantum-2 NDR InfiniBand fabric and on Spectrum-4 800GbE Ethernet when run in 4×200GbE breakout mode.

Specifications

Brand: Lenovo (NVIDIA Mellanox LinkX OEM)
Model / MPN: 03GX910
NVIDIA P/N (equivalent): MCP7Y40-N01A
Product type: Hybrid breakout passive copper DAC cable
Family: NVIDIA Mellanox LinkX NDR / NDR200
Configuration: 1× OSFP (switch end) → 4× QSFP112 (adapter end), 1:4 hybrid breakout
Connectors: OSFP (flat-top, finned) + 4× QSFP112
Speed: 800 Gb/s aggregate at the OSFP end; 200 Gb/s NDR200 per QSFP112 leg
Length: 1.5 m
Wire gauge: 26 AWG (typical for 1.5 m NDR-grade hybrid DAC)
Protocol: NDR / NDR200 InfiniBand; 800GbE / 4×200GbE Ethernet (switch firmware dependent)
Medium: Passive copper — no power draw, no DSP, no laser
Condition: New, factory-sealed

What This Is NOT

  • NOT an OSFP-to-OSFP cable. The 03GX910 is a hybrid splitter — OSFP only on the switch end, QSFP112 on all four adapter ends. The two form factors are mechanically and electrically distinct.

  • NOT a generic NVIDIA-branded part. It is Lenovo P/N 03GX910, the OEM SKU for the same physical cable as NVIDIA MCP7Y40-N01A. Lenovo serial branding and ThinkSystem warranty/XClarity inventory expect the Lenovo P/N specifically.

  • NOT an active or AOC cable. It is passive copper — no electrical retimer, no DSP, no power budget on the switch or adapter. Reach is therefore limited to ~3 m maximum at NDR rates; this 1.5 m variant is the short intra-rack option.

  • NOT a 400GbE QSFP-DD breakout. The four adapter ends are QSFP112 (PAM4, 4 lanes × 100 Gb/s for the 4-lane host case, used here as 2 lanes × 100 Gb/s for 200G NDR200), not QSFP-DD or QSFP28.

  • NOT compatible with SFP+ / SFP28 / QSFP+ / QSFP28 cages. QSFP112 requires a QSFP112-capable port on the adapter or switch; older 100G QSFP28 cages will not negotiate NDR200.

  • NOT for inter-rack reach. At 1.5 m, this cable is strictly an intra-rack, in-cabinet GPU-server to ToR leaf-switch connection. For adjacent-rack or down-row reach, use 3 m DAC variants or an OSFP→4×QSFP112 active AOC.

  • NOT interchangeable with longer-length Lenovo variants (03GX912 / 03GX913 / 4Z57A82886-class P/Ns) in the same hybrid breakout family — confirm the length code before ordering.

Compatibility & Constraints

  • Switch end (OSFP, 800 Gb/s): NVIDIA Quantum-2 QM9700 / QM9790 NDR InfiniBand switches with twin-port OSFP cages, configured in 4×NDR200 split-port mode. Also compatible with NVIDIA Spectrum-4 SN5600 800GbE switches when running 4×200GbE breakout.

  • Adapter end (QSFP112, 200 Gb/s NDR200): NVIDIA ConnectX-7 NDR200 single-port and dual-port adapters (MCX75310AAS-NEAT, MCX755106AS-HEAT, MCX755106AC-HEAT) and the Lenovo-branded ConnectX-7 options for ThinkSystem.

  • Host platforms: Lenovo ThinkSystem SR675 V3, SR670 V2, SD650-N V3 GPU/HPC servers; NVIDIA HGX H100 / H200 reference designs running Lenovo NDR fabric.

  • Switch firmware: Quantum-2 with MLNX-OS / NVOS, NDR split-port mode enabled (1×800G OSFP → 4×200G NDR200); Spectrum-4 SONiC / Cumulus with 4×200GbE breakout profile.

  • Power / cooling: passive — no incremental switch power budget or thermal allowance required.

  • Bend radius: respect the manufacturer minimum bend radius on the four QSFP112 breakout legs to avoid signal-integrity degradation at NDR PAM4 rates.

Frequently Asked Questions (FAQ)

What is the LENOVO 03GX910?

The LENOVO 03GX910 is a Lenovo OEM 1.5 m passive copper hybrid breakout DAC manufactured by NVIDIA Mellanox. One end is a single 800 Gb/s OSFP connector for the switch side; the other end fans out into four 200 Gb/s NDR200 QSFP112 connectors for the adapter side. It is the Lenovo-branded equivalent of NVIDIA Mellanox MCP7Y40-N01A.

Is the 03GX910 an OSFP-to-OSFP cable?

03GX910: No. It is a hybrid 1:4 splitter — OSFP on the switch end only, QSFP112 on all four adapter ends. The lane mapping is handled internally so that the OSFP port (8 lanes × 100 Gb/s PAM4 = 800 Gb/s) is split into four QSFP112 legs of 2 lanes × 100 Gb/s PAM4 = 200 Gb/s NDR200 each.

Will the 03GX910 work with NVIDIA-branded switches and adapters, or only with Lenovo hardware?

Electrically it is the same NVIDIA Mellanox cable as MCP7Y40-N01A, so it links up with NVIDIA Quantum-2 QM9700/QM9790 switches and ConnectX-7 NDR200 adapters. However, the Lenovo P/N 03GX910 carries Lenovo serial branding and is the part Lenovo expects for ThinkSystem warranty and XClarity inventory reporting. For pure-NVIDIA fabrics without a Lenovo support contract, MCP7Y40-N01A is the equivalent SKU to order.

What workload class is this cable intended for?

03GX910: NDR200 / 800 Gb/s hybrid breakout DACs are AI-training and large-HPC interconnect class — east-west GPU traffic between H100 / H200 servers and NDR leaf switches, GPUDirect RDMA, and NCCL collectives. It is not an enterprise top-of-rack, OOB management, or general storage-access cable.

Can I use it for 400GbE QSFP-DD or 100GbE QSFP28 ports?

03GX910: No. The QSFP112 form factor is electrically and mechanically distinct from QSFP-DD (8-lane) and QSFP28 (4×25G NRZ). A QSFP112 leg requires a QSFP112-capable port on the host adapter or switch; older 100G QSFP28 cages will not negotiate NDR200 even when the connector physically fits.

Is 1.5 m enough for my deployment?

03GX910: 1.5 m is the standard intra-rack length used for in-cabinet GPU-server to top-of-rack leaf-switch wiring in dense AI pods. If you need to reach a server in an adjacent rack or down-row, choose a longer-length variant in the same family (3 m or 5 m) or move to an active OSFP-to-4×QSFP112 AOC.

What condition is supplied by T.E.S IT-SOLUTIONS?

New, factory-sealed in original Lenovo / NVIDIA packaging. Each unit is identified by Lenovo P/N (03GX910) and NVIDIA P/N (MCP7Y40-N01A) against the box label before shipping. with worldwide express B2B options.

Why buy from T.E.S IT-SOLUTIONS

T.E.S IT-SOLUTIONS is a Haifa-based data-center networking specialist serving HPC, AI, and enterprise procurement teams since 2011. Every Lenovo / NVIDIA Mellanox cable is identified by MPN, vendor P/N, and family — confirmed against the box label — before it ships, and our engineering team reviews switch/adapter pairing for free before purchase. Multi-currency B2B invoicing with global express shipping, and direct technical contact with our networking engineers rather than a call-center.