Samsung MZWLO1T9HCJR-00A07 — 1.92TB U.2 NVMe Enterprise SSD
Technical Identity
The Samsung MZWLO1T9HCJR-00A07 is an OEM-designated 1.92TB enterprise NVMe SSD in a 2.5-inch U.2 (SFF-8639) form factor with a 15 mm z-height. It uses Samsung V-NAND flash over a PCIe 3.0 x4 NVMe interface and is positioned in the read-intensive to mixed-use tier of Samsung's data-center SSD portfolio. The -00A07 suffix identifies a specific OEM firmware / qualification variant — the physical hardware is the Samsung PM1733-class platform, but the firmware image is keyed to the server vendor that originally qualified it. This is not a consumer SSD, not a SATA or SAS drive, and not an M.2 module. Supplied by T.E.S IT-SOLUTIONS as a refurbished unit — bench-tested with NVMe SMART verification before shipment.

Specifications

OEM: Samsung
Manufacturer Part Number (MPN): MZWLO1T9HCJR-00A07
Capacity: 1.92 TB
Interface: PCIe 3.0 x4 — NVMe 1.x
Form Factor: 2.5-inch U.2 (SFF-8639), 15 mm z-height
NAND Technology: Samsung V-NAND (3D TLC)
Power-Loss Protection: Capacitor-backed (full PLP)
Encryption: AES 256-bit (self-encrypting drive)
Workload Tier: Read-intensive / mixed-use enterprise
Designation: OEM variant — verify server HCL before deployment
Condition: Refurbished — tested and certified by T.E.S IT-SOLUTIONS


What This Is NOT
This is not a SATA 2.5-inch SSD — it will not work in standard SATA backplanes or in 7 mm SATA-only drive trays. It is not a SAS SSD and will not negotiate on a SAS expander. It is not an M.2 NVMe module and cannot be installed in M.2 slots without a dedicated U.2-to-M.2 adapter (which is rarely a supported configuration). It is not a consumer-grade SSD — the V-NAND, capacitor-backed power-loss protection, and AES-256 encryption are calibrated for 24×7 data-center duty cycles, not desktop workloads. It is not a write-intensive (WI) drive — for sustained write-heavy workloads (journaling, OLTP redo, RAID caching) the Samsung PM1735/PM1725a or equivalent mixed-use/WI part is the correct selection.

Compatibility & Constraints
The MZWLO1T9HCJR-00A07 requires a U.2 (SFF-8639) NVMe-capable bay wired to PCIe 3.0 x4 lanes — typical in Dell PowerEdge R-series, HPE ProLiant DL/Apollo, Lenovo ThinkSystem SR, and Supermicro NVMe-enabled chassis. A PCIe 4.0 host backplane negotiates down to Gen3 x4 without issue. Because this is an OEM-keyed firmware variant, deployment inside a vendor-locked chassis (Dell iDRAC HCL, HPE iLO firmware enforcement) should be validated against the vendor's qualified-drive list — the -00A07 suffix may not appear under the same vendor's QDL even if the underlying hardware is identical. In white-box / custom-build servers with a standard U.2 NVMe backplane, the drive behaves as a generic NVMe device. The 15 mm z-height excludes installation in any 7 mm-only tray. This SSD pairs naturally with NVMe-oF storage fabrics built on NVIDIA ConnectX-5/6/7 adapters and BlueField DPUs for disaggregated storage architectures, but it is itself a back-end storage device and not a network component.

Frequently Asked Questions (FAQ)
Q. What capacity and interface does the Samsung MZWLO1T9HCJR-00A07 provide?
The Samsung MZWLO1T9HCJR-00A07 provides 1.92TB capacity over a PCIe 3.0 x4 NVMe interface in a 2.5-inch U.2 (SFF-8639) form factor with 15mm z-height. It uses Samsung V-NAND technology with capacitor-backed power-loss protection and AES 256-bit encryption.
Q. Can the Samsung MZWLO1T9HCJR be used in a SATA or 7mm drive bay?
No. The Samsung MZWLO1T9HCJR is an NVMe U.2 drive with SFF-8639 connector. It does NOT work in SATA or SAS backplanes. The 15mm z-height does NOT fit standard 7mm SATA trays. As an OEM-designated model, verify server HCL compatibility before deployment.
Q. What is the condition of the Samsung MZWLO1T9HCJR from T.E.S IT-SOLUTIONS?
The Samsung 1.92TB MZWLO1T9HCJR-00A07 sold by T.E.S IT-SOLUTIONS at tes-itsolutions.com is refurbished and lab-tested with NVMe SMART data verification to confirm drive health, remaining endurance, and full functionality before shipment.

Why buy from T.E.S IT-SOLUTIONS
T.E.S IT-SOLUTIONS is a Europe-based data-center hardware specialist serving HPC, AI, and enterprise procurement teams since 2007. Every refurbished enterprise SSD ships only after NVMe SMART verification — drive health, total bytes written, remaining endurance, and reallocated-sector counters are all logged before dispatch. We provide free pre-sale consultation on OEM firmware variants, server HCL validation, and NVMe-oF fabric pairing with NVIDIA ConnectX / BlueField hardware. Multi-currency B2B invoicing, EU stock with worldwide express options via DHL / FedEx / UPS, and direct technical contact with our engineering team — not a call-center.