NVIDIA Mellanox

NVIDIA Mellanox MSN2420-CB2F Switch, 25GbE/100GbE, Onyx OS

Part no.MSN2420-CB2F

€4,400.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MSN2420-CB2F: T.E.S IT-SOLUTIONS sells the MSN2420-CB2F at €4,400, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Built to your work order from a recovered chassis, with refurbished power supplies and fans for the airflow you need, then loaded with compatible firmware and operating system and tested before it ships.

See the production flow
MSN2420-CB2FTap the photo for full size
NVIDIA Mellanox MSN2420-CB2F Switch, 25GbE/100GbE, Onyx OS, photo 1 of 3

Description

NVIDIA Mellanox® MSN2420-CB2F — Spectrum 25/100GbE Half-Width Open Ethernet Leaf Switch

Technical Identity

The NVIDIA Mellanox® MSN2420-CB2F is a half-width 1U Open Ethernet leaf / Top-of-Rack switch built on the first-generation NVIDIA Spectrum™ ASIC. It provides 48× 25GbE SFP28 downlink ports and 4× 100GbE QSFP28 uplink ports in a compact half-19" chassis, delivering a non-blocking 2.0 Tb/s switching capacity with sub-microsecond ~300 ns port-to-port latency. The -CB2F suffix denotes Onyx (MLNX-OS) firmware pre-installed, two hot-swap power supplies (1+1 redundant), and forward (port-to-PSU / C2P) airflow — the standard cold-aisle intake configuration for hot-aisle/cold-aisle data center rows.

Specifications

Manufacturer: NVIDIA Mellanox
Part Number (MPN): MSN2420-CB2F
Product Family: Spectrum SN2420 series
Switch ASIC: NVIDIA Spectrum (1st generation)
Port Configuration: 48× 25GbE SFP28 + 4× 100GbE QSFP28
Switching Capacity: 2.0 Tb/s non-blocking
Forwarding Rate: ~1.7 Bpps
Port-to-Port Latency: ~300 ns (cut-through L2/L3)
Packet Buffer: Fully shared, 16 MB on-chip
Operating System: NVIDIA Onyx (MLNX-OS) pre-installed; Cumulus Linux and SONiC supported via ONIE
Form Factor: Half-width 1U (two units fit side-by-side in a single 19" RU)
Power Supplies: 2× hot-swap (1+1 redundant)
Airflow: Forward (C2P — port-side intake → PSU-side exhaust)
Management: Console (RJ45), USB, dedicated 1GbE OOB MGT port
Protocol Support: Ethernet only (Spectrum ASIC — no InfiniBand)
Condition: Refurbished Grade A — checked by T.E.S IT-SOLUTIONS (see Inspection and checks)

What This Is NOT

  • NOT an InfiniBand switch. The Spectrum ASIC is Ethernet-only — for IB fabrics use Quantum-family switches (SB7800, QM87xx, QM97xx).

  • NOT a 200/400/800GbE switch. Maximum per-port speed is 100GbE (QSFP28). For higher-speed Ethernet uplinks see Spectrum-2 (SN3700) or Spectrum-3 (SN4700) platforms.

  • NOT a full-width chassis. This is a half-width 1U — two MSN2420 units mount side-by-side in a single rack unit using the optional dual-mount kit.

  • NOT supplied with transceivers, DACs, AOCs, or rail kit unless explicitly listed in the order.

Compatibility

  • Compatible host adapters: ConnectX-4 / ConnectX-4 Lx, ConnectX-5 / ConnectX-5 Ex, ConnectX-6 / ConnectX-6 Dx, and ConnectX-7 NICs operating in Ethernet mode at 10/25GbE (SFP28 ports) or 40/100GbE (QSFP28 ports).

  • Compatible interconnects: SFP28 25GbE DAC/AOC and optical transceivers on the 48 downlink ports; QSFP28 100GbE DAC/AOC, QSFP28 splitter cables (1× 100G → 4× 25G), and QSFP28 optical transceivers on the 4 uplink ports.

  • Pairs upstream with: Spectrum-2 (SN3700) or Spectrum-3 (SN4700) 100/200/400GbE spine switches.

  • Multi-vendor interop: Standards-based Ethernet — interoperates with Cisco Nexus, Arista 7000-series, Juniper QFX, Dell PowerSwitch, and HPE Aruba CX when running standard L2/L3 protocols.

  • Software: Onyx (MLNX-OS) pre-installed; the switch is ONIE-enabled and accepts Cumulus Linux or SONiC as an alternative NOS.

FAQ

What is the NVIDIA Mellanox MSN2420-CB2F?

A: The MSN2420-CB2F is a half-width 1U Spectrum-based Open Ethernet leaf switch with 48× 25GbE SFP28 ports and 4× 100GbE QSFP28 uplinks, pre-loaded with NVIDIA Onyx (MLNX-OS), equipped with dual redundant PSUs and forward (C2P) airflow.

Does the MSN2420 support InfiniBand?

A: MSN2420-CB2F: No. The Spectrum ASIC is Ethernet-only. For InfiniBand workloads use NVIDIA Quantum-family switches.

Can I use the QSFP28 uplinks as 4× 25GbE breakouts?

A: MSN2420-CB2F: Yes. Each of the 4 QSFP28 ports can be configured as a 4× 25GbE breakout using a QSFP28-to-4×SFP28 splitter, yielding up to 16 additional 25GbE ports.

What does the -CB2F suffix mean?

A: MSN2420-CB2F: C = Onyx (MLNX-OS) pre-installed, B = base feature set, 2 = two redundant power supplies, F = forward airflow (port-side intake to PSU-side exhaust).

Is this unit compatible with non-NVIDIA equipment?

A: MSN2420-CB2F: Yes — standards-based Ethernet with SFP28/QSFP28 MSA-compliant cages. Interoperates with Cisco, Arista, Juniper, Dell, and HPE switches and any standard SFP28/QSFP28 transceiver or DAC.

What is the condition of this unit?

A: MSN2420-CB2F: Refurbished Grade A. Each unit is checked by T.E.S IT-SOLUTIONS before it ships (see Inspection and checks).

Why T.E.S IT-SOLUTIONS

Every MSN2420-CB2F is checked in our lab (see Inspection and checks). We ship from Haifa, Israel with anti-static packaging, and provide pre-sales technical consultation for Spectrum leaf-spine designs, NOS migration (Onyx → Cumulus / SONiC), and breakout-cable selection. See tes-itsolutions.com.