No photo of this unit online yet. Ask for photos

NVIDIA Mellanox

NVIDIA Mellanox MNV303611A-EDLT Innova-2 Flex VPI FPGA Card EDR/100GbE QSFP28

Part no.MNV303611A-EDLT

€179.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MNV303611A-EDLT: T.E.S IT-SOLUTIONS sells the MNV303611A-EDLT at €179, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Recovered from end-of-life equipment, inspected and tested before it ships.

See the production flow

Description

NVIDIA Mellanox® MNV303611A-EDLT — Innova-2 Flex Open VPI, ConnectX-5 + Xilinx KU15P FPGA, Dual QSFP28

Technical Identity

The NVIDIA Mellanox® MNV303611A-EDLT is an Innova-2 Flex Open VPI programmable adapter card. It combines a ConnectX-5 network controller (MT27808A0-FCCF) with a user-programmable Xilinx Kintex UltraScale+ XCKU15P-FFVE1517-2-1 FPGA on a single HHHL card with two QSFP28 ports supporting EDR/QDR InfiniBand and 40/100Gb Ethernet. Host interface is PCIe Gen 3.0/4.0 x8. This variant has no on-board DDR4 memory and no crypto engine. Cooling is a passive heatsink; a tall bracket is fitted. Protocol: VPI (InfiniBand or Ethernet). Condition: Refurbished.

Specifications

Brand: NVIDIA Mellanox
Model / MPN: MNV303611A-EDLT
NVIDIA P/N: —
Product type: FPGA programmable smart adapter (bump-in-the-wire acceleration card)
Product family: NVIDIA Innova-2 Flex Open
Network controller: ConnectX-5 (MT27808A0-FCCF)
FPGA: Xilinx Kintex UltraScale+ XCKU15P-FFVE1517-2-1
Ports: 2× QSFP28
Data rates: InfiniBand QDR/EDR; Ethernet 40/100Gb/s
Host interface: PCIe Gen 3.0/4.0 x8 edge connector
On-board memory: none — this EDLT variant has no DDR4
Crypto: none on this variant
Form factor: HHHL, passive heatsink, tall bracket
FPGA configuration: in-band Flex image update; JTAG header available as hardware backup for Xilinx tools
Protocol: VPI — InfiniBand or Ethernet
Condition: Refurbished

FPGA Development Context

  • Open programmable model: "Flex Open" means the FPGA is open for customer logic — users develop their own RTL/IP with the Xilinx (AMD) Vivado toolchain.

  • Configuration paths: the FPGA image is normally updated in-band; a JTAG interface exists for direct connection to Xilinx development tools as a backup configuration path.

  • No external memory: FPGA designs requiring on-card DDR4 are not supported on this variant — use the on-chip FPGA memory resources.

What This Is NOT

  • NOT a standard ConnectX-5 NIC. This is a development-class FPGA acceleration card: making use of the KU15P requires an FPGA development toolchain (Xilinx/AMD Vivado) and engineering effort. Buy a plain ConnectX-5 adapter if you only need networking.

  • NOT supplied with FPGA designs or IP cores. No application logic, reference designs, licenses, or development cables are included.

  • NOT the crypto variant. The MNV303611A-EDLT has no crypto engine and no on-board DDR4; sibling Innova-2 variants differ (e.g., the 25GbE crypto-oriented MNV303212A-ADLT).

  • NOT HDR or NDR capable. Maximum rates are EDR InfiniBand / 100GbE via QSFP28.

  • NOT a QSFP56 / OSFP card. The cages are QSFP28.

  • NOT supplied with transceivers, cables, or installation accessories.

Compatibility & Hard Constraints

  • Typical head-end platforms: EDR-class InfiniBand switch environments (e.g., Switch-IB 2) or Spectrum-family 40/100GbE switches, with QSFP28 DAC/AOC/optics.

  • Software dependencies: MLNX_OFED driver stack for the ConnectX-5 function; Xilinx Vivado toolchain for FPGA development; firmware and Flex image versions must match NVIDIA documentation.

  • Slot: PCIe x8 — the card links at x8, not x16; ensure adequate chassis airflow for the passive heatsink.

  • Pre-deployment verification: confirm OFED version, ConnectX-5 firmware, Flex/FPGA image, and switch port configuration.

Frequently Asked Questions (FAQ)

What is the NVIDIA Mellanox MNV303611A-EDLT?

The MNV303611A-EDLT is an Innova-2 Flex Open VPI adapter combining a ConnectX-5 controller with a user-programmable Xilinx KU15P FPGA, dual QSFP28 ports at EDR IB / 40-100GbE, PCIe 3.0/4.0 x8, HHHL with passive heatsink and tall bracket, without on-board DDR4 and without crypto.

Do I need an FPGA toolchain to use the MNV303611A-EDLT?

MNV303611A-EDLT: For the programmable FPGA path, yes — designs are built with the Xilinx (AMD) Vivado toolchain and loaded via the in-band update flow or the JTAG backup interface. The ConnectX-5 networking function itself uses the standard MLNX_OFED stack.

Can it work as a normal network adapter?

MNV303611A-EDLT: The on-board ConnectX-5 provides standard InfiniBand/Ethernet connectivity through the QSFP28 ports. However, if plain networking is all you need, a standard ConnectX-5 NIC is the more appropriate product.

Does the MNV303611A-EDLT have on-board memory for FPGA designs?

MNV303611A-EDLT: No. This variant carries no DDR4; FPGA designs must rely on on-chip memory resources of the XCKU15P.

What is the connector form factor?

MNV303611A-EDLT: Two QSFP28 cages supporting up to EDR InfiniBand / 100GbE. They are not QSFP56 or OSFP cages, and the card is not HDR/NDR capable.

What condition is supplied by T.E.S IT-SOLUTIONS?

MNV303611A-EDLT: Refurbished. Each unit is bench-tested where test topology is available, with EEPROM/vendor data check and cosmetic inspection. global B2B shipping.

Why T.E.S IT-SOLUTIONS

Every MNV303611A-EDLT unit ships with: (1) link verification where test topology is available, (2) EEPROM / vendor data check, (3) full cosmetic inspection, (4) professional anti-static packaging, (5) global B2B shipping from Haifa, Israel, (6) technical consultation for HPC / AI fabric design at no extra cost. See tes-itsolutions.com.