NVIDIA Mellanox

NVIDIA Mellanox MMS1V00-WM 400GbE QSFP-DD DR4 Transceiver 500m SMF

Part no.MMS1V00-WM

€1,200.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MMS1V00-WM: T.E.S IT-SOLUTIONS sells the MMS1V00-WM at €1,200, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Recovered from end-of-life equipment, inspected and tested before it ships.

See the production flow
MMS1V00-WMTap the photo for full size
NVIDIA Mellanox MMS1V00-WM 400GbE QSFP-DD DR4 Transceiver 500m SMF, photo 1 of 5

Description

NVIDIA Mellanox® MMS1V00-WM — 400GbE QSFP-DD DR4 Optical Transceiver, 500 m PSM SMF

Technical Identity

The NVIDIA Mellanox® MMS1V00-WM is a 400 Gigabit Ethernet QSFP-DD pluggable optical transceiver from the NVIDIA LinkX family, implementing the IEEE 802.3bs 400GBASE-DR4 specification. It delivers four lanes of 100G PAM4 over four pairs of single-mode fiber (parallel single-mode, PSM) via an MPO-12 / APC interface and 1310 nm DFB lasers, with a maximum reach of 500 m over G.652 / OS2 SMF. Eight 50G PAM4 host-side electrical lanes are gear-boxed to four 100G PAM4 optical lanes, and DDM telemetry is reported through the CMIS / I²C plane. Designed for 400GbE Ethernet spine and leaf links in NVIDIA Spectrum-based data-center fabrics, AI training back-end clusters, and high-density NVMe-oF storage networks. Supplied refurbished, checked by T.E.S IT-SOLUTIONS (see Inspection and checks).

Specifications

Brand: NVIDIA Mellanox
Model / MPN: MMS1V00-WM
Product type: 400GbE Optical Transceiver Module
Product family: NVIDIA LinkX Optical Transceivers
Form factor: QSFP-DD (8-lane, MSA-compliant)
Optical interface: 400GBASE-DR4 (IEEE 802.3bs)
Connector: MPO-12 / APC (8 active fibers — 4 TX + 4 RX)
Speed: 400 GbE (4 × 100G PAM4 optical lanes)
Wavelength: 1310 nm
Medium: Parallel single-mode fiber (PSM SMF, G.652 / OS2)
Reach: Up to 500 m over SMF
Host electrical: 8 × 50G PAM4 (CEI-56G-VSR)
Protocol: Ethernet only (not InfiniBand)
Management: CMIS over I²C, DDM / DOM, hot-pluggable
Power: ≤ 10 W typical (Class 7 envelope)
Operating temperature: 0 °C to 70 °C (commercial)
Condition: Refurbished — checked by T.E.S IT-SOLUTIONS (see Inspection and checks)

Manufacturer documentation: NVIDIA MMS1V00-WM 400GbE QSFP-DD DR4 transceiver product specifications. T.E.S IT-SOLUTIONS is independent of NVIDIA.

What This Is NOT

  • NOT a DAC or AOC cable. Pluggable optical module — fiber patch cables sold separately.

  • NOT a multimode (SR4 / SR8) module. DR4 is single-mode at 1310 nm; will not interoperate with multimode OM3 / OM4 / OM5 optics on the opposite end.

  • NOT an OSFP transceiver. QSFP-DD only — will not fit OSFP cages on Quantum-2 InfiniBand switches or the OSFP variant of Spectrum-4 SN5600.

  • NOT an InfiniBand NDR optic. 400GBASE-DR4 is Ethernet only; for NDR 400G InfiniBand use the OSFP MMA4Z00 / MMS4X00 single-mode family.

  • NOT a long-reach (2 km / 10 km) module. DR4 is rated to 500 m only — for 2 km use FR4, for 10 km use LR4.

  • NOT a standalone breakout. 4 × 100GbE breakout requires an MPO-to-4×duplex breakout fiber and four matching 100G-DR optics on the far end.

  • NOT bundled with MPO patch cables, fan-out fibers, or fiber cleaning kits.

Compatibility & Constraints

  • Switch side (Ethernet): NVIDIA Spectrum-3 SN4700 (32× QSFP-DD 400GbE), SN4600 (64× QSFP-DD), and other QSFP-DD-400GbE Ethernet switches accepting 400GBASE-DR4 CMIS optics. NOT for Spectrum-4 SN5600 OSFP cages.

  • Adapter side: NVIDIA ConnectX-7 QSFP-DD variants in 400GbE Ethernet mode (e.g., MCX755106AS-HEAT) and other 400GbE QSFP-DD host adapters supporting CMIS and 8 × 50G PAM4 electrical.

  • Far-end pairing: Another 400GBASE-DR4 module over PSM SMF, or four 100GBASE-DR modules via a 1-to-4 MPO breakout fiber for 4 × 100GbE topologies.

  • Cabling: MPO-12 / APC patch, single-mode (OS2 / G.652), Type-B polarity, low-loss preferred. Length up to 500 m.

  • Cleaning: MPO end-faces must be inspected and cleaned per IEC 61300-3-35 before every plug-in.

  • Firmware: Switch / adapter firmware must include MMS1V00-WM in its AVL or run in transceiver-permissive mode (verify against NVIDIA Cumulus, NVOS, or MLNX-OS release notes).

Frequently Asked Questions (FAQ)

What is the NVIDIA Mellanox MMS1V00-WM?

The MMS1V00-WM is an NVIDIA Mellanox LinkX 400GbE QSFP-DD pluggable optical transceiver implementing the 400GBASE-DR4 standard. It transmits four lanes of 100G PAM4 over parallel single-mode fiber at 1310 nm, with up to 500 m reach over an MPO-12 patch cable, and is used for 400GbE Ethernet links in NVIDIA Spectrum data-center fabrics.

Single-mode or multimode — what fiber does the MMS1V00-WM need?

MMS1V00-WM: Single-mode only. 400GBASE-DR4 is a PSM (parallel single-mode) interface using G.652 / OS2 fiber and an MPO-12 / APC connector. It will not light up on multimode (OM3 / OM4 / OM5) fiber and will not interoperate with SR4 or SR8 multimode modules on the far end.

Can I use the MMS1V00-WM as a 4 × 100GbE breakout transceiver?

Yes, electrically — DR4 is one of the few 400G optics that supports clean breakout. Pair the MMS1V00-WM with an MPO-12-to-four-duplex breakout fiber and put four 100GBASE-DR modules on the far end, one per duplex fiber. The switch port must be configured in 4 × 100GbE breakout mode in software.

Will the MMS1V00-WM work in OSFP cages on Quantum-2 or Spectrum-4 switches?

No. MMS1V00-WM is a QSFP-DD form factor — it is mechanically and electrically incompatible with OSFP cages on NVIDIA Quantum-2 (QM9700 / QM9790) NDR InfiniBand switches and the OSFP variant of Spectrum-4 SN5600. For 400G OSFP single-mode optics, use the MMA4Z00 / MMS4X00 OSFP family instead.

Is the MMS1V00-WM an Ethernet or InfiniBand optic?

MMS1V00-WM: Ethernet only. The DR4 modulation, lane mapping, and CMIS profile target 400GbE per IEEE 802.3bs. It does not negotiate as an NDR InfiniBand optic. For NDR 400G InfiniBand single-mode reach, use OSFP single-mode variants (MMA4Z00-NS / MMS4X00-NM and family).

What workload class fits a 400GBASE-DR4 link?

MMS1V00-WM: 400GbE optical at 500 m is sized for AI training east-west traffic between leaf and spine, GPU-to-GPU cluster fabrics, NVMe-oF storage spines, high-bandwidth HPC, and large multi-tenant data-center backbone — workloads where 200G no longer fits aggregation but reach exceeds the practical range of DAC or AOC.

What deployment topology suits 500 m DR4?

MMS1V00-WM: Spine-to-leaf within a single data hall, intra-row aggregation, mid-data-center cross-room runs, and AI cluster spine fabrics where adjacent and non-adjacent rows must be optically interconnected. For sub-100 m intra-rack runs use a 400G DAC or AOC instead; for over 2 km, use 400G-FR4 or 400G-LR4 long-reach optics.

What condition is supplied by T.E.S IT-SOLUTIONS?

Refurbished. Each MMS1V00-WM is checked by T.E.S IT-SOLUTIONS (see Inspection and checks) and shipped from Haifa, Israel with global B2B options.

Why buy from T.E.S IT-SOLUTIONS

T.E.S IT-SOLUTIONS is a Haifa-based data-center networking specialist serving HPC, AI, and enterprise procurement teams since 2011. We identify every unit by MPN, NVIDIA P/N, and optical / ASIC family before it ships, and we provide free pre-sale compatibility advice covering switch, adapter, fiber polarity, AVL / firmware verification, and breakout pairing for your specific NVIDIA Spectrum or third-party 400G QSFP-DD platform. global B2B shipping, multi-currency invoicing, and direct contact with our engineering team.