NVIDIA Mellanox

NVIDIA Mellanox MCP4Y10-N01A-FLT NDR 800Gb/s OSFP Passive DAC 1.5m Flat Top

Part no.MCP4Y10-N01A-FLT

€379.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MCP4Y10-N01A-FLT: T.E.S IT-SOLUTIONS sells the MCP4Y10-N01A-FLT at €379, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Recovered from end-of-life equipment, inspected and tested before it ships.

See the production flow
MCP4Y10-N01A-FLTTap the photo for full size
NVIDIA Mellanox MCP4Y10-N01A-FLT NDR 800Gb/s OSFP Passive DAC 1.5m Flat Top, photo 1 of 3

Description

NVIDIA Mellanox® MCP4Y10-N01A-FLT — NDR 800Gb/s Twin-Port OSFP Passive DAC, 1.5m, Flat Top

Technical Identity

The NVIDIA Mellanox® MCP4Y10-N01A-FLT is a 1.5-meter flat-top passive copper cable from the NVIDIA LinkX MCP4Y10-Nxxx family: twin-port 2x400Gb/s OSFP to twin-port 2x400Gb/s OSFP, IB twin-port NDR, up to 800Gb/s aggregate over 8 electrical pairs of 100G-PAM4. NVIDIA ordering description: passive copper cable, IB twin port NDR, up to 800Gb/s, OSFP, 1.5m, flat top. Condition: Refurbished Grade A.

Specifications

Brand: NVIDIA Mellanox
Model / MPN: MCP4Y10-N01A-FLT
NVIDIA P/N (980-series): — (not listed in the public MCP4Y10-Nxxx ordering table for the 1.5m flat-top; the finned-top 1.5m sibling MCP4Y10-N01A is 980-9IA0Q-00N01A)
Product type: Passive copper DAC (twin-port straight cable, flat-top shells)
Product family: NVIDIA LinkX MCP4Y10-Nxxx
Connector: Twin-port OSFP (flat top) to twin-port OSFP (flat top)
Configuration: 1-to-1 (carries 2 x 400Gb/s NDR channels end to end)
Speed: up to 800Gb/s aggregate (2 x 400Gb/s NDR)
Modulation: 100G-PAM4 per electrical lane (8 pairs)
Length: 1.5m
Protocol: InfiniBand twin-port NDR (per NVIDIA classification)
Medium: Passive copper — no active electronics
Standards: OSFP MSA, IEEE 802.3ck (per NVIDIA MCP4Y10-Nxxx product specifications)
Operating temperature: 0°C to 70°C (commercial)
Condition: Refurbished Grade A

Manufacturer documentation: NVIDIA MCP4Y10-Nxxx 2x400Gb/s OSFP passive DAC product specifications. T.E.S IT-SOLUTIONS is independent of NVIDIA.

Lane & Signal Logic

  • Each end (twin-port OSFP): 8 electrical pairs × 100Gb/s PAM4 = up to 800Gb/s aggregate.

  • Channelization: two independent 400Gb/s NDR (4-lane) ports per OSFP shell — a twin-port cable, not a breakout.

  • Flat-top shells: the FLT variant uses flat-top OSFP connectors for ports whose cage or riding heat sink provides the cooling; the non-FLT sibling uses finned-top shells for air-cooled switch cages. Verify the cage type of your platform before ordering.

  • Passive: no signal-conditioning electronics.

What This Is NOT

  • NOT a QSFP, QSFP28, QSFP56, QSFP-DD or QSFP112 cable. OSFP form factor on both ends — it will not fit any QSFP-family cage.

  • NOT the finned-top variant. That is MCP4Y10-N01A (no FLT suffix); this flat-top unit is for cages cooled by the system rather than by connector fins.

  • NOT an active copper cable (ACC). Fully passive — no integrated signal conditioning.

  • NOT an AOC or optical cable. Copper conductor only; no optics, no optical power readings.

  • NOT a 1-to-2 or 1-to-4 splitter. Straight twin-port OSFP to twin-port OSFP assembly.

  • NOT Ethernet by default. NVIDIA classifies this family as IB twin-port NDR; Ethernet use must be verified against switch port profile and firmware.

  • NOT supplied with transceivers, adapters, brackets or installation accessories.

Compatibility & Hard Constraints

  • Typical head-end platforms: NVIDIA Quantum-2 generation NDR environments with twin-port OSFP 2x400G cages that accept flat-top connectors.

  • Endpoint requirement: both ends must terminate in twin-port OSFP NDR cages; confirm flat-top compatibility (cage/heat-sink cooling) on both ports.

  • Software dependencies: switch firmware with the required NDR port profile; cable recognized via EEPROM — verify in switch CLI / mlxlink output; MLNX_OFED or DOCA stack on any host endpoints.

  • Reach: 1.5m fixed — passive NDR copper is intra-rack only.

  • Power: drawn from host OSFP cage — near zero; no external supply required.

  • Pre-deployment verification: confirm switch firmware, port-mode configuration and cage cooling type.

Frequently Asked Questions (FAQ)

What is the NVIDIA Mellanox MCP4Y10-N01A-FLT?

MCP4Y10-N01A-FLT: A 1.5m flat-top passive copper cable, twin-port 2x400Gb/s OSFP to twin-port 2x400Gb/s OSFP, IB twin-port NDR, up to 800Gb/s aggregate with 100G-PAM4 signaling.

What does the FLT suffix mean?

MCP4Y10-N01A-FLT: Flat top. The OSFP shells are flat rather than finned; they are intended for ports where the cage or a riding heat sink provides cooling. The finned-top 1.5m sibling is MCP4Y10-N01A.

Will the MCP4Y10-N01A-FLT fit a QSFP56 or QSFP-DD cage?

MCP4Y10-N01A-FLT: No. It uses OSFP connectors on both ends and is physically and electrically incompatible with any QSFP-family cage.

Is this cable active or passive?

MCP4Y10-N01A-FLT: Passive copper DAC — no active electronics, near-zero power, lowest latency; short intra-rack reach by design.

What hardware works with MCP4Y10-N01A-FLT?

MCP4Y10-N01A-FLT: Typical platforms are NVIDIA Quantum-2 generation NDR systems with twin-port OSFP cages that accept flat-top connectors. Verify firmware, port profile and cage cooling type before deployment.

Is it a splitter?

MCP4Y10-N01A-FLT: No. It is a straight twin-port to twin-port cable carrying two 400Gb/s NDR channels; it does not fan out to separate endpoints.

What condition is supplied by T.E.S IT-SOLUTIONS?

MCP4Y10-N01A-FLT: Refurbished Grade A — bench-tested where test topology is available, EEPROM check, cosmetic inspection. global B2B shipping.

Why T.E.S IT-SOLUTIONS

Every MCP4Y10-N01A-FLT unit ships with: (1) link verification where test topology is available, (2) EEPROM / vendor data check, (3) full cosmetic inspection, (4) professional anti-static packaging, (5) global B2B shipping from Haifa, Israel, (6) technical consultation for HPC and AI fabric design at no extra cost. See tes-itsolutions.com.