NVIDIA Mellanox

NVIDIA Mellanox MC2206130-0A1 QSFP 40Gb/s QDR Passive Copper Cable 1.5m

Part no.MC2206130-0A1

€15.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MC2206130-0A1: T.E.S IT-SOLUTIONS sells the MC2206130-0A1 at €15, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Recovered from end-of-life equipment, inspected and tested before it ships.

See the production flow
MC2206130-0A1Tap the photo for full size
NVIDIA Mellanox MC2206130-0A1 QSFP 40Gb/s QDR Passive Copper Cable 1.5m, photo 1 of 1

Description

NVIDIA Mellanox® MC2206130-0A1 — QSFP 40Gb/s QDR Passive Copper Cable, 1.5m

Technical Identity

The NVIDIA Mellanox® MC2206130-0A1 is a 1.5-meter QSFP-to-QSFP passive copper (DAC) cable from the MC2206130 family, officially described by Mellanox as "passive copper cable, VPI, up to 40 Gb/s, QSFP". It carries 4 lanes × 10Gb/s NRZ (40Gb/s aggregate) for InfiniBand QDR/FDR10 links, built on 30AWG twinax per the -130 OPN designation. The 0A1 suffix denotes 1.5m in the Mellanox length-code convention. Protocol: InfiniBand QDR/FDR10 (VPI classification). Condition: Refurbished, checked (see Inspection and checks).

Specifications

Brand: NVIDIA Mellanox
Model / MPN: MC2206130-0A1
NVIDIA P/N: — (legacy OPN, no 980- ordering P/N)
Product type: Passive copper cable (DAC)
Product family: Mellanox LinkX QSFP+ DAC (MC22061xx)
Connector: QSFP+ (SFF-8685) on both ends
Configuration: 1-to-1 point-to-point
Speed: Up to 40Gb/s aggregate (4 × 10Gb/s)
Length: 1.5m (0A1 length code)
Wire gauge: 30 AWG
Protocol: VPI — InfiniBand QDR/FDR10
Medium: Copper twinax, passive
Modulation: NRZ, 10Gb/s per lane
Management: EEPROM, SFF-8636 compliant I2C interface
BER: Better than 1E-15 (per product brief)
Operating temperature: 0°C to 70°C (commercial)
Condition: Refurbished, tested

What This Is NOT

  • NOT an active cable or AOC. Passive copper with no signal electronics in the data path; max 0.1W for the management EEPROM only.

  • NOT a QSFP28 or QSFP56 cable. QDR/FDR10-generation QSFP+. Not rated for EDR 100Gb/s (QSFP28), HDR 200Gb/s (QSFP56) or NDR fabrics.

  • NOT an FDR 56Gb/s cable. Full FDR requires the MC2207xxx family; this cable tops out at 40Gb/s.

  • NOT a splitter or breakout. Straight 1-to-1 QSFP-to-QSFP assembly.

  • NOT the 40GbE-designated OPN. The Ethernet-designated equivalent family is MC2210xxx; verify port profile before any 40GbE deployment of this VPI part.

  • NOT supplied. with adapters, transceivers, brackets, or installation accessories.

Compatibility & Hard Constraints

  • Typical head-end platforms: QDR/FDR10-capable InfiniBand switches such as the IS5000 series, or SX60xx-series ports configured for QDR/FDR10.

  • Compatible endpoints: ConnectX-2 / ConnectX-3 HCAs at 40Gb/s.

  • Software dependencies:

    • NVIDIA MLNX_OFED driver stack on host endpoints

    • Subnet manager (OpenSM or switch-managed) for InfiniBand operation

    • Cable profile recognized via EEPROM — verify in switch CLI / mlxlink or ibdiagnet output

  • Reach: 1.5m fixed length — do not exceed.

  • Power: drawn from the host QSFP cage — no external supply required.

  • Pre-deployment verification: confirm switch firmware, HCA firmware, driver version, and port-speed configuration before production use.

Frequently Asked Questions (FAQ)

What is the NVIDIA Mellanox MC2206130-0A1?

The MC2206130-0A1 is a 1.5-meter QSFP passive copper cable from the Mellanox MC2206130 family, officially described as a passive copper cable, VPI, up to 40Gb/s, QSFP. It carries 4 lanes x 10Gb/s NRZ for IB QDR/FDR10 links and uses 30AWG twinax per the -130 OPN designation.

What does the 0A1 length suffix mean?

MC2206130-0A1: In the Mellanox OPN convention, 0A1 denotes 1.5 meters. This mapping is verified in the official NVIDIA/Mellanox product brief for parallel families (MC2207130-0A1 = 1.5m, MCP1700-B01AE = 1.5m).

Will the MC2206130-0A1 work in EDR, HDR or NDR networks?

MC2206130-0A1: No. It is a QDR/FDR10-generation 40Gb/s QSFP cable. EDR 100Gb/s requires QSFP28 cables, HDR 200Gb/s requires QSFP56, and NDR requires OSFP-class cables. Use this cable only in QDR/FDR10 fabrics.

Is this a passive DAC or an active cable?

MC2206130-0A1: Passive DAC. Per the official product brief the MC2206130 family requires no additional power (max 0.1W for the management EEPROM) and contains no signal-conditioning electronics in the data path. It is not an active copper cable and not an AOC.

What switches and adapters work with MC2206130-0A1?

MC2206130-0A1: Typical head-end platforms are QDR/FDR10-capable InfiniBand switches such as the IS5000 series or SX60xx-series ports configured for QDR/FDR10. Typical endpoints are ConnectX-2 and ConnectX-3 HCAs at 40Gb/s.

What condition is supplied by T.E.S IT-SOLUTIONS?

MC2206130-0A1: Refurbished. Each unit is bench-tested where test topology is available — link verification, EEPROM check and cosmetic inspection. global B2B shipping.

Why T.E.S IT-SOLUTIONS

Every MC2206130-0A1 unit ships with: (1) link verification where test topology is available, (2) EEPROM / vendor data check, (3) full cosmetic inspection, (4) professional anti-static packaging, (5) global B2B shipping from Haifa, Israel, (6) technical consultation for HPC and AI fabric design at no extra cost. See tes-itsolutions.com.