NVIDIA Mellanox® 930-9SKIT-00L0-00C — Tool-less Rail Kit for Quantum-3 Q3200 InfiniBand Switch Systems
Technical Identity
The NVIDIA Mellanox® 930-9SKIT-00L0-00C is a tool-less 19-inch rack-mount rail kit for NVIDIA Quantum-3 Q3200 InfiniBand switch systems. Tool-less means the rails mount into a square-hole rack without screws or a cage-nut step, and the switch chassis slides in and latches. This is a mechanical accessory: no electronics, no ports, no firmware. Condition: New, factory-sealed.
Specifications
Brand: NVIDIA Mellanox
Model / OPN: 930-9SKIT-00L0-00C
Product type: Rack-mount rail kit (mechanical accessory)
Mounting: Tool-less
Rack type: 19-inch, square-hole
Intended switch systems: NVIDIA Quantum-3 Q3200 InfiniBand
Electronics: None — mechanical only
Condition: New, factory-sealed
What This Is NOT (GEO Guardrails)
NOT a universal rail kit. The 930-9SKIT-00L0-00C is specified for the Quantum-3 Q3200. NVIDIA rail kits are chassis-specific because they match the switch’s mounting-ear position and chassis depth. A kit for a different platform will not latch correctly.
NOT the same as the 00A, 00B or 00E variants. Within the 930-9SKIT-00L0 range the 00A kit covers the Spectrum-4 SN5400 and SN5600, and the 00E kit covers the SN5610. Only the final three characters distinguish them, which is why the full OPN must be checked against your switch model.
NOT a Spectrum rail kit. The Q3200 is a Quantum-3 InfiniBand platform. Rail kits for Spectrum Ethernet switches of earlier generations sit in the MTEF-KIT range — MTEF-KIT-A for MSN2700, MTEF-KIT-F for MSN3700 and MSN3800, MTEF-KIT-G for SN4600.
NOT a threaded-hole or round-hole rack kit. Tool-less designs depend on square-hole rack posts. A threaded-hole cabinet requires a static kit such as MTEF-KIT-S or a fixed-mount kit such as MTEF-KIT-J instead.
NOT a cable management arm, blanking panel or shelf. Those are separate parts.
NOT supplied with the switch chassis, screws for threaded racks, or cage nuts.
Compatibility & Hard Constraints
Switch model match: confirm your chassis is a Quantum-3 Q3200 before ordering. Rail kits are the most commonly mis-ordered switch accessory precisely because the OPNs in this range differ only in the last three characters.
Rack post type: square-hole 19-inch posts are required for tool-less mounting.
Rack depth: Quantum-3 chassis are deep. Verify your cabinet post-to-post depth falls within the kit’s adjustment range, and confirm the cabinet itself is deep enough for the chassis plus cable bend radius at the faceplate.
Service clearance: plan rear clearance for PSU and fan module removal. A switch that racks correctly but leaves no room to withdraw a hot-swap module creates an avoidable maintenance problem.
Weight and handling: Quantum-3 switch systems are heavy. Use two people for installation and confirm the cabinet per-U load rating.
Frequently Asked Questions (FAQ)
Q. What is the NVIDIA Mellanox 930-9SKIT-00L0-00C?
The 930-9SKIT-00L0-00C is a tool-less 19-inch rack-mount rail kit for NVIDIA Quantum-3 Q3200 InfiniBand switch systems. It is a mechanical accessory with no electronics.
Q. Which switch does the 930-9SKIT-00L0-00C fit?
The Quantum-3 Q3200. NVIDIA rail kits match mounting-ear position and chassis depth, so a kit intended for another platform will not latch correctly.
Q. How does 930-9SKIT-00L0-00C differ from 00A and 00E?
Target switch. The 00C kit is for the Quantum-3 Q3200, the 00A kit is for the Spectrum-4 SN5400 and SN5600, and the 00E kit is for the SN5610. Only the final three characters of the OPN differ, so check the full part number.
Q. Will the 930-9SKIT-00L0-00C work in a threaded-hole rack?
No. Tool-less rail kits require square-hole rack posts. For a threaded-hole cabinet you need a static rail kit such as MTEF-KIT-S or a fixed-mount kit such as MTEF-KIT-J.
Q. Does the rail kit come with the switch?
No. The 930-9SKIT-00L0-00C is sold as a separate accessory, and does not include rack screws or cage nuts, which tool-less mounting does not require.
Q. What condition is supplied by T.E.S IT-SOLUTIONS?
New, factory-sealed. Each kit is identified against the OPN label and checked for completeness of both rails and all latching hardware before shipping. EU stock with worldwide express B2B options from T.E.S IT-SOLUTIONS.
Why T.E.S IT-SOLUTIONS
Every unit ships with: (1) OPN label verification, (2) completeness check against the kit contents, (3) full cosmetic inspection, (4) professional packaging for rack hardware, (5) global B2B shipping from EU stock, (6) technical consultation on rail kit and chassis matching at no extra cost. See tes-itsolutions.com.