Lot of 5 - NVIDIA Mellanox MNPH28B-XTC ConnectX-2 EN Dual-Port SFP+ 10GbE PCIe Network Adapter: This is a bulk lot of five (5) refurbished ConnectX-2 EN dual-port 10 Gigabit Ethernet PCIe NICs with SFP+ optical/copper interfaces. The MNPH28B-XTC is a PCIe Gen2 x8 server NIC built on the Mellanox ConnectX-2 EN ASIC. This is an Ethernet-only adapter; it is not an InfiniBand HCA and it is not a VPI dual-protocol card. These units are refurbished.
Engineering Context
The ConnectX-2 EN silicon delivers full line-rate 10GbE per port with stateless TCP/UDP/IP offloads, Large Send Offload (LSO), Large Receive Offload (LRO), and RSS to reduce host CPU load. The card supports IEEE 802.3ad LACP link aggregation, 802.1Q VLAN tagging, and 802.1Qbb priority flow control for lossless DCB fabrics. RoCE (RDMA over Converged Ethernet) is supported in hardware, enabling kernel-bypass storage traffic. Aggregate line rate is 20 Gb/s (10 Gb/s x 2 ports) over a PCIe 2.0 x8 host link.
Deployment & Use Cases
Dual-port 10GbE uplinks for VMware ESXi and Hyper-V hypervisors. iSCSI and NFS storage initiators. RoCE-enabled SMB Direct file servers on Windows Server. Bonded LACP server uplinks where two 10GbE ports double aggregate throughput. Cost-effective seed hardware for lab and bench rigs to validate ConnectX driver behavior before production refresh.
Technical Specifications
Compatibility & Hard Constraints
Compatible with Linux mlx4_en driver (kernel 2.6.30 and later), Windows Server WinOF, and VMware ESXi 5.x to 6.x with legacy ConnectX-2 drivers. ESXi 7.0 and later removed native ConnectX-2 support; this adapter is not suitable for greenfield ESXi 7/8 deployments. SFP+ transceivers and DAC cables are sold separately. The MNPH28B-XTC is a 10GbE-only card and does not negotiate to 40GbE or InfiniBand. ConnectX-2 has reached end-of-support under NVIDIA; firmware updates are no longer issued.
Why Choose T.E.S IT-SOLUTIONS
T.E.S IT-SOLUTIONS checks every ConnectX-2 adapter before shipment (see Inspection and checks). Browse the full refurbished networking catalog at https://www.tes-itsolutions.com. Worldwide shipping with 1-3 day handling.
Frequently Asked Questions
What protocols does the MNPH28B-XTC have?
The MNPH28B-XTC protocols is Ethernet (10GbE), RoCE.
What is the MNPH28B-XTC NOT compatible with?
it is not an InfiniBand HCA and it is not a VPI dual-protocol card. Confirm fitment against your platform before ordering MNPH28B-XTC.
What condition is the MNPH28B-XTC supplied in, and who sells it?
The MNPH28B-XTC is supplied in Refurbished condition by T.E.S IT-SOLUTIONS from Haifa, Israel, with 1-3 business day handling and worldwide B2B shipping.