HPE

HPE P65328-001 NDR200 InfiniBand OSFP to 4xQSFP112 Splitter DAC, Cable 2m

Part no.P65328-001

€435.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Also available: New, €870.00, in stock

Where to buy the P65328-001: T.E.S IT-SOLUTIONS sells the P65328-001 at €435, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Recovered from end-of-life equipment, inspected and tested before it ships.

See the production flow
P65328-001Tap the photo for full size
HPE P65328-001 NDR200 InfiniBand OSFP to 4xQSFP112 Splitter DAC, Cable 2m, photo 1 of 1

Description

HPE P65328-001 — NDR200 InfiniBand OSFP to 4×QSFP112 Passive Splitter DAC, 2m

Technical Identity

The HPE P65328-001 is a 2-meter passive Direct Attach Copper (DAC) splitter cable for NDR-class InfiniBand and 200GbE fabrics. It is HPE-branded data-center networking hardware carrying the HPE option part number P65328-001. The cable presents one OSFP twin-port head with an integrated heatsink (8 electrical lanes aggregated) splitting into four QSFP112 connectors, each running at 200Gb/s NDR200 (2 lanes × 100Gb/s PAM4 per leg). It is a fixed-length factory-assembled passive copper assembly — not a transceiver pair, not an AOC, and not field-terminable. Designed for short intra-rack reach inside dense NDR200 compute pods.

Specifications

Brand: HPE (Hewlett Packard Enterprise)
Model / MPN: P65328-001
Product type: Passive DAC splitter cable (1×OSFP → 4×QSFP112)
Family: HPE NDR200 InfiniBand / 200GbE cables
Connectors: 1× OSFP twin-port (switch end, integrated heatsink) → 4× QSFP112 (adapter ends)
Configuration: 1:4 hybrid splitter (one switch port to four host adapters)
Speed per leg: 200Gb/s NDR200 / 200GbE (4 × 200G = 800Gb/s aggregate)
Length: 2m
Wire gauge: Passive copper, typically 30AWG for 2m at NDR200
Protocol: InfiniBand NDR200 and 200GbE Ethernet
Medium: Twinaxial copper, passive (no active components, no external power)
Modulation: 100Gb/s PAM4 per lane (2 lanes per QSFP112 leg)
Condition: Refurbished — checked by T.E.S IT-SOLUTIONS (see Inspection and checks)

What This Is NOT

  • NOT an OSFP-to-OSFP cable. Hybrid splitter, switch end OSFP, adapter ends QSFP112. Not a symmetric OSFP-on-both-ends cable.

  • NOT a 1:1 or 1:2 cable. Fixed 1:4 split. The OSFP source port must be set to 4-way splitter mode in switch firmware.

  • NOT generic NVIDIA Mellanox firmware identity. HPE-branded ≠ generic Mellanox firmware — EEPROM carries HPE option part data; pure NVIDIA switches accept it but show the HPE OEM string in CLI.

  • NOT active optical or transceiver pair. Fully passive copper, no laser, no DSP, no external power.

  • NOT for inter-rack runs. 2m passive copper is intra-rack only. For 3–30m at NDR200 use ACC or AOC; longer spans need transceivers over MMF/SMF.

  • NOT compatible with QSFP-DD, QSFP56, QSFP28, or SFP-family cages. Host ends are QSFP112 — will not seat in HDR (QSFP56) or EDR (QSFP28) adapter ports.

  • NOT NDR full-rate (400Gb/s) per leg. Each leg is NDR200 (200Gb/s, 2 lanes). For 400G NDR full-rate, use a 1:1 or 1:2 cable to a 4-lane QSFP112/OSFP host port.

Compatibility & Constraints

  • Switch end (OSFP, splitter mode): HPE NDR InfiniBand switches built on NVIDIA Quantum-2 silicon, and bare NVIDIA Quantum-2 platforms (QM9700, QM9790) with the OSFP source port set to 4× NDR200 splitter mode.

  • Host adapter ends (QSFP112): NVIDIA ConnectX-7 NDR200 adapters (MCX75310AAS-NEAT single-port, MCX75510AAS-NEAT dual-port) and HPE-branded NDR200 HCAs in HPE ProLiant DL, HPE Cray EX, or HPE Apollo servers.

  • Length budget: 2m passive copper is well within NDR200 reach — no ACC equalizer or AOC required.

  • FEC / SerDes: Relies on host SerDes equalization and standard NDR FEC (KP4 / RS-FEC). Endpoints must run firmware that recognizes HPE option-part EEPROM strings.

  • NOT for HDR, EDR, or FDR fabrics. NDR-only. QSFP56 (HDR 200G) is a physically different connector despite the overlapping 200G label.

Frequently Asked Questions (FAQ)

What is the HPE P65328-001?

The HPE P65328-001 is a 2-meter passive Direct Attach Copper splitter cable for NDR200 InfiniBand and 200GbE. It has one OSFP twin-port head with an integrated heatsink (switch end) and four QSFP112 connectors (host adapter ends), each running 200Gb/s NDR200. It is HPE-branded data-center networking hardware.

Is the P65328-001 a symmetric OSFP-to-OSFP cable?

No. The P65328-001 is a hybrid 1:4 splitter, switch end OSFP, adapter ends QSFP112. It is not OSFP on both ends and is not interchangeable with a 1:1 OSFP-to-OSFP cable or a 1:2 splitter.

What switches and adapters does the P65328-001 connect?

P65328-001: The OSFP end connects to NDR-class switches built on NVIDIA Quantum-2 silicon — HPE-branded Quantum-2 platforms and NVIDIA QM9700 / QM9790 — with the source port configured for 4-way splitter mode. The four QSFP112 ends connect to NVIDIA ConnectX-7 NDR200 adapters (MCX75310AAS-NEAT, MCX75510AAS-NEAT) or HPE-branded NDR200 HCAs in HPE ProLiant DL, Cray EX, or Apollo servers.

What is the throughput per leg and in aggregate?

P65328-001: Each of the four QSFP112 legs runs at 200Gb/s (NDR200 InfiniBand or 200GbE Ethernet) using two lanes of 100Gb/s PAM4. The OSFP head aggregates all eight lanes for a total of 800Gb/s across the splitter.

Is the P65328-001 suitable for AI training fabrics?

P65328-001: Yes. NDR200 at 200Gb/s per host is a standard speed class for AI / ML training east-west traffic, GPU-to-GPU collective communication, and large HPC fabrics. At 2m it serves intra-rack GPU pods — a top-of-rack NDR200 switch port fanning out to four GPU servers in the same rack.

Can this cable reach across racks or rows?

P65328-001: No. 2m passive copper is intra-rack only — top-of-rack to servers within the same rack. For inter-rack NDR200 runs (3–30m) use Active Copper Cables (ACC) or Active Optical Cables (AOC); for longer spans use NDR200 transceivers over MMF or SMF.

What condition is supplied by T.E.S IT-SOLUTIONS?

The P65328-001 is supplied refurbished. T.E.S IT-SOLUTIONS inspects each connector, measures DC continuity on every lane, and validates port detection on NDR200 hardware (Quantum-2 + ConnectX-7) before shipment. Cables ship from Haifa, Israel with anti-static packaging and 1–3 day global B2B handling.

Why buy from T.E.S IT-SOLUTIONS

T.E.S IT-SOLUTIONS is a Haifa-based data-center networking specialist serving HPC, AI, and enterprise procurement teams since 2011. We handle multi-vendor InfiniBand and Ethernet hardware — NVIDIA Mellanox, HPE, Dell, Intel, Cisco — and every unit is identified by MPN, OEM part number, and family before it ships. Free pre-sale compatibility advice on switch / adapter / cable pairing and splitter-mode configuration. with global express options and direct technical contact with our engineering team. See tes-itsolutions.com.