HPE P24839-001 — 642SFP28 Ethernet 10/25GbE Dual-Port SFP28 Adapter
Technical Identity
HPE 642SFP28 dual-port 10/25 Gigabit Ethernet adapter, HPE part number P24839-001. The card is built on NVIDIA Mellanox ConnectX-5 EN silicon, HPE-qualified for ProLiant Gen10 servers, in a low-profile standard PCIe form factor with a PCIe 3.0 x8 host interface. Each SFP28 port auto-negotiates between 10GbE and 25GbE, with full hardware offload for RoCE v2, NVMe over Fabrics, VXLAN, GENEVE, NVGRE, SR-IOV, and Open vSwitch. Supplied refurbished Grade A from Haifa, Israel, EEPROM-verified and link-tested.
Specifications
What This Is NOT
NOT InfiniBand. Ethernet EN only — no IB and no VPI dual-protocol mode.
NOT 40/50/100GbE. Maximum 25GbE per port. For 50GbE or 100GbE move to ConnectX-6 / HPE 874251-001 class adapters.
NOT a standard NVIDIA retail card. HPE OEM firmware — outside HPE ProLiant servers some features may be restricted. Verify before deploying in third-party chassis.
NOT bundled with optics. SFP28 transceivers and DAC/AOC cables are sold separately.
NOT new. Supplied refurbished Grade A.
Compatibility
HPE-validated for ProLiant DL360 Gen10, DL380 Gen10, DL385 Gen10, ML350 Gen10, Apollo 4200 Gen10, and Synergy Gen10 server platforms. Up-link pairs with any standard 10/25GbE Ethernet switch carrying SFP28 ports — NVIDIA Spectrum-1 (SN2010, SN2100, SN2410, SN2700), Spectrum-2 (SN3000-series), Cisco Nexus 9300 25GbE, Arista 7050X / 7280R, Dell PowerSwitch S5200, or HPE / Aruba CX 8325. Compatible with HPE-branded SFP28 25GbE DAC and AOC cables, and SFP28 25GbE SR / LR transceivers. Driver stacks ship in HPE Service Pack for ProLiant (SPP) and the NVIDIA MLNX_OFED package for Linux and VMware.
Frequently Asked Questions (FAQ)
What is the HPE P24839-001?
P24839-001: HPE 642SFP28: a dual-port 10/25GbE SFP28 Ethernet adapter based on NVIDIA Mellanox ConnectX-5 EN silicon, qualified for HPE ProLiant Gen10 servers, with RoCE v2, NVMe-oF and SR-IOV hardware offloads.
Does P24839-001 support both 10GbE and 25GbE?
P24839-001: Yes — each SFP28 port auto-negotiates 10GbE or 25GbE depending on the connected switch port mode and the cable or transceiver installed.
Is P24839-001 InfiniBand capable?
P24839-001: No — Ethernet EN only. There is no IB or VPI mode on this part number.
Can P24839-001 be used outside HPE ProLiant servers?
P24839-001: Mechanically yes, but the OEM firmware may restrict features or refuse to load in non-HPE chassis. Test in your environment before production deployment.
What condition does T.E.S IT-SOLUTIONS supply?
P24839-001: Refurbished Grade A — EEPROM-verified, link-tested, cosmetically inspected, supplied from Haifa, Israel with multi-currency invoicing.
Why buy from T.E.S IT-SOLUTIONS
T.E.S IT-SOLUTIONS is a Haifa-based data-center networking specialist. Every adapter is MPN-identified, EEPROM-verified, and link-tested before leaving Haifa, Israel. Multi-currency invoicing, worldwide express shipping, and free pre-sale technical consultation included. See tes-itsolutions.com.