Dell Force10 GP-10GSFP-1S — 10GBASE-SR SFP+ Optical Transceiver, 850nm MMF, 300m OM3
Technical Identity
The Dell Force10 GP-10GSFP-1S is a pluggable 10GBASE-SR SFP+ optical transceiver operating at 850 nm over multimode fibre. It delivers 10 Gigabit Ethernet at the IEEE 802.3ae line rate of 10.3125 Gb/s, with a maximum reach of 300 m on OM3 and 400 m on OM4. GP-10GSFP-1S is the Dell ordering P/N for the Force10 line, coded for Dell switch platforms. It is a discrete hot-pluggable optic that seats in an SFP+ cage on a switch line card, NIC or media converter. Protocol: Ethernet only. Condition: New.
Specifications
What This Is NOT
NOT a 10GBASE-LR or LRM optic. The GP-10GSFP-1S is 850 nm short-wavelength for multimode fibre. It will not reach 10 km and will not link over single-mode fibre.
NOT an SFP28, SFP or QSFP module. It is SFP+ per SFF-8431. It will not negotiate 25GbE, and it does not fit QSFP, QSFP28 or QSFP+ cages.
NOT a direct-attach copper cable or AOC. This is a discrete optic requiring a separate duplex LC patch cord, which is not included.
NOT a 1000BASE-SX gigabit optic. It operates at 10 Gb/s; 1 Gb/s fallback is not a supported mode of 10GBASE-SR.
NOT vendor-neutral. Dell-coded optics are read by the host switch EEPROM check. Non-Dell platforms may refuse the module or require an unsupported-transceiver override.
NOT supplied with fibre patch cords, adapters, or cleaning accessories.
Compatibility & Hard Constraints
Typical intended platforms include: Dell Force10 S-Series and Z-Series switches and Dell Networking N-Series and S-Series platforms with SFP+ cages at 10GbE.
Fibre requirement: duplex multimode patch cord, LC/UPC, OM3 or OM4. OM1 and OM2 reduce reach substantially; single-mode fibre will not link.
Pairing: both ends of the link must be 10GBASE-SR at 850 nm. Do not pair with an LR, ER or CWDM optic.
Coding: the module is Dell-coded. Verify the host platform accepts Dell EEPROM data, or that an unsupported-transceiver override is permitted in your environment.
Pre-deployment verification: confirm switch OS version, port speed configuration and transceiver whitelist policy before installation.
Handling: keep the dust plug fitted until connection and inspect / clean fibre end faces before mating. Contamination is the leading cause of high RX errors on 850 nm MMF links.
Frequently Asked Questions (FAQ)
What is the Dell Force10 GP-10GSFP-1S?
The GP-10GSFP-1S is a Dell Force10 10GBASE-SR SFP+ optical transceiver operating at 850 nm over multimode fibre, delivering 10 Gb/s Ethernet with a reach of 300 m on OM3 and 400 m on OM4, terminated in a duplex LC connector.
What fibre type and distance does the GP-10GSFP-1S support?
Multimode fibre only. The GP-10GSFP-1S reaches 300 m on OM3 and 400 m on OM4. It will not establish a link over single-mode fibre, and OM1/OM2 cabling reduces usable distance significantly.
Can the GP-10GSFP-1S be used in an SFP28 or QSFP port?
No. The GP-10GSFP-1S is an SFP+ module per the SFF-8431 MSA. It does not fit QSFP, QSFP+ or QSFP28 cages, and it will not negotiate 25GbE in an SFP28 port.
Does the GP-10GSFP-1S support DOM diagnostics?
Yes. The GP-10GSFP-1S exposes Digital Optical Monitoring — TX power, RX power, module temperature, supply voltage and laser bias current — to the host switch CLI or NMS for proactive link-health monitoring.
Will the GP-10GSFP-1S work in a non-Dell switch?
The GP-10GSFP-1S is Dell-coded. Host switches read transceiver EEPROM data and may reject a non-matching vendor code or require an unsupported-transceiver override. Verify your platform policy before deployment.
What condition is supplied by T.E.S IT-SOLUTIONS?
New. Each GP-10GSFP-1S is identified against the module label and, where test topology is available, link-verified before shipping. with worldwide express B2B options from T.E.S IT-SOLUTIONS.
Why T.E.S IT-SOLUTIONS
Every unit ships with: (1) link verification where test topology is available, (2) EEPROM / vendor data check, (3) full cosmetic inspection, (4) professional anti-static packaging, (5) global B2B shipping from Haifa, Israel, (6) technical consultation for HPC / AI fabric design at no extra cost. See tes-itsolutions.com.