NVIDIA Mellanox MSX6012F-1BRS-WT 12-Port FDR InfiniBand Switch: This is a 1U SwitchX-2 based InfiniBand switch with 12 QSFP+ ports running FDR at 56 Gb/s per port. It is an unmanaged FDR InfiniBand switch (requires an external subnet manager such as OpenSM running on a fabric host). This is a fixed-port InfiniBand switch, not an Ethernet switch and not a VPI dual-protocol unit. This is a refurbished unit. The unit carries a wide-temperature operating rating, intended for environments outside standard data-center conditioning.
Engineering Context
The MSX6012F-1BRS-WT is built around the SwitchX-2 ASIC. Each QSFP+ port aggregates 4 lanes of 14 Gb/s NRZ signaling for 56 Gb/s FDR per port, with an aggregate non-blocking switching capacity of 1.344 Tb/s (12 ports × 56 Gb/s, full-duplex). FDR is backward-compatible with QDR (40 Gb/s) and DDR (20 Gb/s) at the link layer. The chassis uses C2P (Connector-to-Power / reverse) — connector airflow in for thermal management. Switching is performed by an on-board PowerPC 460 management processor handling control-plane functions. Power is delivered by a single AC power supply.
Deployment & Use Cases
Top-of-Rack InfiniBand aggregation in small HPC clusters, GPU-to-GPU interconnect for compute pods up to 12 endpoints, edge fabric for storage building blocks, and fabric expansion within a single rack.
Technical Specifications
OEM: NVIDIA Mellanox
Part Number: MSX6012F-1BRS-WT
Switch ASIC: SwitchX-2
Ports: 12 × QSFP+ (FDR)
Per-Port Data Rate: 56 Gb/s FDR (4 × 14 Gb/s NRZ)
Aggregate Switching Capacity: 1.344 Tb/s (full-duplex)
Backward Compatibility: FDR / QDR (40 Gb/s) / DDR (20 Gb/s)
Management: Unmanaged (external subnet manager required)
Management CPU: PowerPC 460 (PPC460)
Form Factor: 1U short depth, 19-inch rack-mountable
Power Supply: Single AC PSU
Airflow: C2P (Connector-to-Power / reverse) — connector airflow in
Operating Range: Wide-temperature variant (extended thermal range)
Compliance: RoHS6
Condition: Refurbished — Tested by T.E.S IT-SOLUTIONS
Compatibility & Hard Constraints
Compatible with NVIDIA Mellanox ConnectX-3 / ConnectX-3 Pro / ConnectX-4 / ConnectX-5 InfiniBand HCAs at FDR speed, and with QSFP+ FDR copper (DAC) and active optical (AOC) cables. Requires an external subnet manager (OpenSM on a Linux host or another managed switch in the fabric) to bring up the InfiniBand subnet. This is an InfiniBand-only switch — it does not run Ethernet on these ports and is not a VPI (Virtual Protocol Interconnect) unit. Does not support EDR (100 Gb/s) or HDR (200 Gb/s) speeds; FDR is the maximum link rate. Reverse airflow (C2P): mix carefully with forward-airflow equipment in the same hot/cold aisle layout to avoid recirculation. No on-board MLNX-OS, no embedded subnet manager, no in-band management interface. Single PSU — no power redundancy on this SKU. Rail kit and console cable are not guaranteed; confirm accessories at order time.
Why Choose T.E.S IT-SOLUTIONS
T.E.S IT-SOLUTIONS power-tests every InfiniBand switch, verifies all QSFP+ ports for link integrity at FDR, and inspects PSU function and chassis condition before shipment. We provide expert consultation on InfiniBand fabric design, global shipping, and a 1–3 day handling window. Visit tes-itsolutions.com for the full refurbished NVIDIA Mellanox catalog.