NVIDIA Mellanox

NVIDIA Mellanox MIS5022Q-1BFR InfiniScale IV QDR 40Gb/s 8-Port IB Switch

Part no.MIS5022Q-1BFR

€750.00

In stockCondition: Refurbished

Request a quote

Checkout runs on the secure Wix checkout page.

Where to buy the MIS5022Q-1BFR: T.E.S IT-SOLUTIONS sells the MIS5022Q-1BFR at €750, in stock, and ships worldwide from Haifa, Israel.

How this unit is built

Built to your work order from a recovered chassis, with refurbished power supplies and fans for the airflow you need, then loaded with compatible firmware and operating system and tested before it ships.

See the production flow
MIS5022Q-1BFRTap the photo for full size
NVIDIA Mellanox MIS5022Q-1BFR InfiniScale IV QDR 40Gb/s 8-Port IB Switch, photo 1 of 4

Description

NVIDIA Mellanox MIS5022Q-1BFR InfiniScale IV QDR InfiniBand Switch, 8-Port QSFP, 1 PSU, Unmanaged, No FRUs: This is a fixed-configuration 8-port QDR (40Gb/s) InfiniBand edge switch built around the InfiniScale IV ASIC. It is unmanaged — there is no chassis manager, no Subnet Manager, and no in-band CLI; subnet management must be provided externally by a host running OpenSM or by a managed switch elsewhere in the fabric. Airflow runs PSU side to connector side. The unit ships with a single power supply and no field-replaceable units. This is a short-depth 1U rack-mountable enclosure — it is not a managed director-class switch and is not the 36-port MIS5030Q. RoHS-6 compliant. This is a refurbished unit.

Engineering Context

The InfiniScale IV ASIC delivers full bisection bandwidth across all 8 QSFP ports at 40Gb/s QDR for 640Gb/s of aggregate non-blocking switching. Sub-100ns port-to-port cut-through latency is typical for this generation. Because the switch carries no on-board management, it has no IP address and no Ethernet management port — fabric topology, partitioning and routing are entirely the responsibility of an external Subnet Manager. The 1BFR variant is the "no-FRU" build: power supply and fans are not field-replaceable, so RMA replacement of cooling or power components is not supported in the field. Designed as a low-cost edge or workgroup switch in QDR HPC clusters.

Deployment & Use Cases

Edge or top-of-rack switch in small QDR InfiniBand HPC clusters. Storage back-end fabric for Lustre, GPFS or BeeGFS QDR deployments. Test bench or staging fabric where managed director switches are not justified. Aggregation point for up to 8 compute nodes feeding a larger fat-tree spine. Educational HPC labs where fabric size is bounded.

Technical Specifications

OEM: Mellanox Technologies (NVIDIA)
Part Number: MIS5022Q-1BFR
Switch ASIC: InfiniScale IV
Ports: 8 x QSFP
Per-Port Speed: 40Gb/s QDR InfiniBand
Aggregate Bandwidth: 640Gb/s non-blocking
Management: Unmanaged (external Subnet Manager required)
Power Supplies: 1 (fixed, non-FRU)
FRU Support: No (suffix "F")
Airflow: PSU side to connector side
Form Factor: 1U short-depth rack-mountable
Compliance: RoHS-6
Condition: Refurbished — Tested by T.E.S IT-SOLUTIONS

Compatibility & Hard Constraints

Compatible with any QDR-capable InfiniBand HCA over QSFP — including ConnectX-2, ConnectX-3 and ConnectX-3 Pro adapters in QDR mode — over copper QSFP DAC, QSFP active optical cables or QDR fibre transceivers. Requires an external OpenSM (host-based) or a managed switch in the same subnet to bring the fabric up; the switch will not service traffic without a running Subnet Manager. Cannot be daisy-chain-managed via the 1BFR itself because the unit has no management plane. Not Ethernet-capable — these are dedicated InfiniBand QSFP ports, not VPI. Airflow direction is fixed; verify it matches your hot-aisle/cold-aisle convention before installation.

Why Choose T.E.S IT-SOLUTIONS

Every MIS5022Q-1BFR is checked before shipment (see Inspection and checks). T.E.S IT-SOLUTIONS provides consultation on subnet manager placement and fabric topology. Visit tes-itsolutions.com for bulk pricing. 1–3 day handling time with global tracked shipping.

Frequently Asked Questions

What per-port speed does the MIS5022Q-1BFR have?

The MIS5022Q-1BFR per-port speed is 40Gb/s QDR InfiniBand.

What is the MIS5022Q-1BFR NOT compatible with?

This is a short-depth 1U rack-mountable enclosure — it is not a managed director-class switch and is not the 36-port MIS5030Q. Confirm fitment against your platform before ordering MIS5022Q-1BFR.

What condition is the MIS5022Q-1BFR supplied in, and who sells it?

The MIS5022Q-1BFR is supplied in Refurbished condition by T.E.S IT-SOLUTIONS from Haifa, Israel, with 1-3 business day handling and worldwide B2B shipping.