Dell PowerEdge M1000e — 10U Modular Blade Enclosure, 16x Half-Height Blade Bays
Technical Identity
The Dell PowerEdge M1000e is a 10U modular blade enclosure for Dell PowerEdge M-series blade servers. It houses up to 16 half-height, 8 full-height, or 32 quarter-height blades, with bays for up to six hot-plug power supplies, nine hot-plug fan modules, six I/O modules across three redundant fabrics, and Chassis Management Controller (CMC) modules. This listing is for the enclosure: blades are not included, and the installed count of power supplies, fans, CMC modules, and I/O modules is per the unit label. Condition: Refurbished.
Specifications (platform, per Dell documentation)

Brand: Dell
Model: PowerEdge M1000e blade enclosure
Product type: Modular blade server enclosure (enclosure only)
Form factor: 10U, 19" rack
Blade capacity: 16x half-height / 8x full-height / 32x quarter-height
Power supply bays: up to 6x hot-plug PSUs (installed count and wattage per unit label)
Cooling: up to 9x hot-plug redundant fan modules (installed count per unit label)
I/O module bays: 6 bays across 3 redundant fabrics (A/B/C); installed modules per unit label
Management: Chassis Management Controller (CMC) bays (1 or 2 installed per unit); optional iKVM module
Dimensions: approx. 44.0 cm H x 44.7 cm W x 75.4 cm D
Condition: Refurbished

Engineering Context
The M1000e was Dell's flagship blade platform across multiple PowerEdge M-series generations. It is end-of-life at Dell (superseded by the PowerEdge MX platform), but remains widely fielded; refurbished enclosures are used to extend existing M-series estates, provide chassis-level spares, and build low-cost lab and training environments.
Use Cases

Chassis-level spare or capacity expansion for existing M1000e / M-series blade estates
Lab, training, and development environments using inexpensive M-series blades
Consolidation of legacy blade workloads pending migration to current platforms

What This Is NOT (Guardrails)

NOT supplied with blade servers. Blades are not included; only the enclosure and the modules listed per the unit label.
NOT a fixed PSU/fan/IO configuration claim. Installed power supplies, fan modules, CMC modules, and I/O modules are per the unit label — confirm before purchase.
NOT a standalone server. The M1000e provides power, cooling, management, and I/O infrastructure only; compute requires M-series blades.
NOT a current-generation platform. End-of-life at Dell — intended for legacy support, spares, lab, and training use.
NOT a Dell PowerEdge MX7000. The MX platform is a different, incompatible enclosure generation; M-series blades and MX sleds are not interchangeable.
NOT supplied with rack rails or power cords unless explicitly stated per unit.

Compatibility & Hard Constraints

Blades: typical supported blades include Dell PowerEdge M-series half-height, full-height, and quarter-height models; supported blade generations depend on the CMC firmware level — verify against Dell documentation before deployment.
I/O: fabric A/B/C I/O modules (Ethernet switches, pass-throughs, Fibre Channel, InfiniBand options existed) must match the blade mezzanine cards — verify fabric planning per Dell M1000e documentation.
Power: M1000e PSUs are high-wattage 200–240V units; facility power and PDU planning must be verified before installation.
Weight/handling: a populated M1000e is very heavy; de-populate modules before rack installation.
Pre-deployment verification: confirm CMC firmware level, PSU count/redundancy policy, fan population, and midplane revision per unit before commissioning.

Frequently Asked Questions (FAQ)
Q. What is the Dell PowerEdge M1000e?
The M1000e is a 10U modular blade enclosure that houses up to 16 half-height, 8 full-height, or 32 quarter-height Dell PowerEdge M-series blade servers, with shared power (up to 6 PSUs), cooling (9 fan modules), management (CMC), and 6 I/O module bays across 3 fabrics.
Q. Are blade servers included with this M1000e?
No. This is an enclosure listing. Blades are not included, and the installed PSUs, fans, CMC modules, and I/O modules are per the unit label.
Q. Which blades work in the M1000e?
Dell PowerEdge M-series blades (half-height, full-height, and quarter-height). Supported blade generations depend on the enclosure's CMC firmware level — verify the required firmware for your target blades against Dell documentation.
Q. What power does the M1000e require?
The enclosure accepts up to six hot-plug 200–240V power supplies. The installed PSU count and wattage of this unit is per the unit label; facility power and redundancy policy must be planned before installation.
Q. Is the M1000e still supported by Dell?
The M1000e is end-of-life at Dell and has been superseded by the PowerEdge MX platform. It is offered for legacy estate support, spares, lab, and training use.
Q. What condition is the M1000e supplied in by T.E.S IT-SOLUTIONS?
Refurbished. Each enclosure is inspected, cleaned, and checked (power-on and CMC access where test topology is available), then packed for freight shipment. EU stock, global B2B shipping.
Why T.E.S IT-SOLUTIONS
Every unit ships with: (1) functional inspection where test topology is available, (2) full cosmetic inspection, (3) professional packaging suitable for freight, (4) global B2B shipping from EU stock, (5) technical consultation for legacy platform support at no extra cost.
Condition: Refurbished — enclosure only; installed modules per unit label.